Everything Electrical & Electronic Have an electrical problem? Lighting, Alternators, gauges, DIC, HUD, etc? Post it here. Please post Audio problems in the Audio forum, and Engine control problems in the appropriate Mechanical forum for your year.

Turn signal question

Thread Tools
 
Search this Thread
 
Old 03-15-2004, 04:05 PM
  #1  
Senior Member
Posts like a Corvette
Thread Starter
 
Hailey's Avatar
 
Join Date: May 2003
Location: New Hampshire
Posts: 1,305
Likes: 0
Received 0 Likes on 0 Posts
Hailey is on a distinguished road
Default Turn signal question

This may seem like a strange question, but is there a way to disable the sound the directional makes? The sound is a little louder than most cars, and it drives my husband crazy. I never noticed a problem with it, but he has basically stopped using the signal because of it...please help...I don't want to end up in an accident because he won't signal anymore. :P
Old 03-15-2004, 04:10 PM
  #2  
Senior Member
Expert Gearhead
 
Jim W's Avatar
 
Join Date: Dec 2002
Location: Mississauga, Ontario
Posts: 20,893
Likes: 0
Received 1 Like on 1 Post
Jim W is on a distinguished road
Default

GM stock relays are a bit loud, you can get aftermarket versions for cheap, and should have a muffled tone. Relay is not the true term, I believe Andy Green called it a turn signal actuator or something..I dunno

Or stick your hands out the window and resort to more primtive signalling
Old 03-16-2004, 01:45 AM
  #3  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Hailey, go out to the car (or have Rob do it ), and hunt around under the dash for the relay. You may have to remove the hushpanel above the driver'* feet. When you find it, tape a bunch of insulating foam over it. Tuck it in good, and tape it. You'll never see it, and it will muffle the sound.

Add this to the 'honey-dew- list
Old 03-16-2004, 10:08 AM
  #4  
Senior Member
Posts like a Corvette
Thread Starter
 
Hailey's Avatar
 
Join Date: May 2003
Location: New Hampshire
Posts: 1,305
Likes: 0
Received 0 Likes on 0 Posts
Hailey is on a distinguished road
Default

Originally Posted by willwren
Hailey, go out to the car (or have Rob do it ), and hunt around under the dash for the relay. You may have to remove the hushpanel above the driver'* feet. When you find it, tape a bunch of insulating foam over it. Tuck it in good, and tape it. You'll never see it, and it will muffle the sound.

Add this to the 'honey-dew- list
Hmmm...good idea. I think I'll do it myself too...I know a lot more about the car than he does now...he might screw something up. Besides...I enjoy working on it.

Anyway, thanks.
Old 03-16-2004, 12:17 PM
  #5  
Junior Member
 
mista_sse's Avatar
 
Join Date: Jan 2003
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
mista_sse is on a distinguished road
Default

really? I never heard that before; Actually I never payed too much attention to it,
Old 03-16-2004, 12:21 PM
  #6  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

I think they want it to be somewhat audible, so you don't granny around town with it on all the time. With the HUD, it seems pointless, but they don't want to use a 'quiet' relay and noisy relay in two different models.
Old 03-16-2004, 01:07 PM
  #7  
Senior Member
True Car Nut
 
acg_ssei's Avatar
 
Join Date: Sep 2002
Location: Chicago, IL
Posts: 2,409
Likes: 0
Received 1 Like on 1 Post
acg_ssei is on a distinguished road
Default

Originally Posted by Jim W
GM stock relays are a bit loud, you can get aftermarket versions for cheap, and should have a muffled tone. Relay is not the true term, I believe Andy Green called it a turn signal actuator or something..
I think they just call it a turn-signal flasher. It'* not a relay because it'* not using one circuit to switch on another one; it'* just turning its own circuit on and off repeatedly.

The noise it makes is primarily because it'* clipped to the dash frame (or steering column support; I forget which), and that is deliberate so that you _will_ hear it. All you need to do is remove the lower hush panel to locate it, unclip it and let it dangle from its wires. It should be a lot quieter then, and your husband won't have to go through an idiotic explanation to the traffic cop as to why he didn't signal a left turn, causing the busload of nuns to swerve into the day-care center, etc...
Old 03-16-2004, 04:32 PM
  #8  
Senior Member
Posts like a Camaro
 
Plurr's Avatar
 
Join Date: Feb 2003
Location: Indianapolis, IN / West Lafayette
Posts: 1,004
Likes: 0
Received 0 Likes on 0 Posts
Plurr is on a distinguished road
Default

yah its a flasher when i went to buy a new one cuz my old one stopped working i purchased a "loud flasher" and installed it in the same place that the old one was and it was not even close in sound (it was much quieter) so yah im sure you could buy one that you wont be able to hear.
Old 03-16-2004, 06:47 PM
  #9  
Senior Member
Posts like a Corvette
Thread Starter
 
Hailey's Avatar
 
Join Date: May 2003
Location: New Hampshire
Posts: 1,305
Likes: 0
Received 0 Likes on 0 Posts
Hailey is on a distinguished road
Default

Wow...thanks everyone (so many options...I think I'll unclip it first, then if that isn't enough, insulate it, and if that'* still not enough, buy a cheapie aftermarket ).
Old 03-16-2004, 06:51 PM
  #10  
Executed
 
shortstuf212559's Avatar
 
Join Date: Dec 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
shortstuf212559 is on a distinguished road
Default

mine doesnt even make a noise barely anymore after i unlcipped it... i never notice it anymore.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kcoop99
2000-2005
2
06-30-2007 06:16 AM
artofwar215
1992-1999
2
03-16-2007 08:38 PM
TMoney
1992-1999
4
01-26-2007 10:19 PM
acg_ssei
General GM Chat
10
07-15-2004 03:42 PM
DJGOODYB31682
1992-1999
4
10-21-2002 11:47 PM



Quick Reply: Turn signal question



All times are GMT -4. The time now is 04:40 PM.