92 olds won't crank, no 12 volts at solenoid, no security warning
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Feb 2012
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
92 olds won't crank, no 12 volts at solenoid, no security warning
Guys I'm trying to trace this circuit back. The only wiring diagram I have is the one off the Autozone website. The iginition switch is represented by box, without showing contact closures.
From the solenoid, it'* purple, then changes to yellow out of the nuetral safety switch and continues all the way to the ignition switch I believe. What'* the input to the ignition switch in order to provide 12v on the yellow.
Any other obvious things to check? Relays? Fuses?
I'm an instrumentation and controls tech for rocket engine testing, but man do I hate automotive schematics
Thanks in advance guys!
From the solenoid, it'* purple, then changes to yellow out of the nuetral safety switch and continues all the way to the ignition switch I believe. What'* the input to the ignition switch in order to provide 12v on the yellow.
Any other obvious things to check? Relays? Fuses?
I'm an instrumentation and controls tech for rocket engine testing, but man do I hate automotive schematics
Thanks in advance guys!
#2
Senior Member
True Car Nut
if your other stuff is working its likely the ign has power to it, back probe the yellow with the key in start you should have 12v. if so see the that you have 12v in and out of neutral safety switch if so you could have an open somewhere between the switch and the starter
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Feb 2012
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
No 12 volts at the nuetral safety. That was with the connector open. Also fuse 1 (crank signal-sir) and 21 IP lighting) had no voltage.
Any other ideas guys?
Any other ideas guys?
Thread
Thread Starter
Forum
Replies
Last Post
Danthurs
Trouble shooting + Test Procedures
0
11-02-2009 09:48 AM