HID Retrofit
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Nov 2010
Location: Youngstown, OH
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
HID Retrofit
Hey, guys! I'm a newb on this site and, as I can already see, it'* a great community!
So here'* the deal. I have a 2004 Pontiac Bonneville SE that I'm looking to retrofit with a proper HID setup. (Probably FX or RX330 if possible w/ clear leans) Does anyone out there fabricate the housings for the projectors? i.e, I buy or pay for them to buy the complete OEM-style housing and they fab this to fit? As I've seen there is a bit of fabrication work to be done and...well...I'm terrible at such things. =)
I'm sure this question has been asked quite frequently, as such I apologize should this be a duplicate post.
Thanks in advance!
So here'* the deal. I have a 2004 Pontiac Bonneville SE that I'm looking to retrofit with a proper HID setup. (Probably FX or RX330 if possible w/ clear leans) Does anyone out there fabricate the housings for the projectors? i.e, I buy or pay for them to buy the complete OEM-style housing and they fab this to fit? As I've seen there is a bit of fabrication work to be done and...well...I'm terrible at such things. =)
I'm sure this question has been asked quite frequently, as such I apologize should this be a duplicate post.
Thanks in advance!
#2
Artist
True Car Nut
You can buy a set of aftermarket headlights off ebay that are Depo. That'* your best bet if your afraid of messing up so you don't wind up with a non-drivable car.
Thread
Thread Starter
Forum
Replies
Last Post
Bonnie442
Detailing & Appearance
21
02-13-2011 01:15 AM
slick94prix
Lounge
1
08-03-2007 05:46 PM