LED's again.
#1
Senior Member
Certified Car Nut
Thread Starter
LED'* again.
If i wanted to run 8 LED'* off of my cig lighter would i just wire up 4 in parallel in two sets? Or should i slap on a resistor. I got some 2.2k ohm resistors just incase. These will be run off a switch in me and Bonnie94sse'* cars....
As of now it'* 8 LEDs in each car, and possibly 2 more later on.
As of now it'* 8 LEDs in each car, and possibly 2 more later on.
#4
Senior Member
Certified Car Nut
Thread Starter
Can't say what it'* for. An electrical engineer on my floor said that the 2.2k ohm resistors i bought is right, but they are only 1/4 watt, he said using two 1k ohm resistors that are 1/4 watt equalling 1/2 watt would be better...
#6
Senior Member
Certified Car Nut
Thread Starter
No i don't know what you posted before. It'* inside the car, running off the cig lighter. This is something that only a few people here have heard about at all, let alone seen.
#7
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonneMeMN
Can't say what it'* for. An electrical engineer on my floor said that the 2.2k ohm resistors i bought is right, but they are only 1/4 watt, he said using two 1k ohm resistors that are 1/4 watt equalling 1/2 watt would be better...
Thread
Thread Starter
Forum
Replies
Last Post