Keyless programming
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Dallas (Lewisville), TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Keyless programming
Okay, the code says my 96 LeSabre has keyless entry and I tried to start programming it but the doors don't lock unlock to say it'* in test mode.
What is the best way to jumper the OB II? and Where would the factory keyless receiver be located?
Thanks
What is the best way to jumper the OB II? and Where would the factory keyless receiver be located?
Thanks
#2
Junior Member
Posts like a Ricer Type-R
The procedures are in Techinfo.
I suspect you're jumpering the wrong pins.
Please verify that you have RPO code AUO on your spare tire cover, and that the VIN on the RPO label matches the VIN of the car.
Then double-check the jumper pins you're using.
I suspect you're jumpering the wrong pins.
Please verify that you have RPO code AUO on your spare tire cover, and that the VIN on the RPO label matches the VIN of the car.
Then double-check the jumper pins you're using.
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Dallas (Lewisville), TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
The procedures are in Techinfo.
I suspect you're jumpering the wrong pins.
Please verify that you have RPO code AUO on your spare tire cover, and that the VIN on the RPO label matches the VIN of the car.
Then double-check the jumper pins you're using.
I suspect you're jumpering the wrong pins.
Please verify that you have RPO code AUO on your spare tire cover, and that the VIN on the RPO label matches the VIN of the car.
Then double-check the jumper pins you're using.
Check, RPO AU0
Check, VIN matches
What is best to use to jumper the pins?
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Dallas (Lewisville), TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Our RFA in your year is located above the hush panel on the passenger side... or basically behind the glove box.
Thread
Thread Starter
Forum
Replies
Last Post
sickofthinking
1992-1999
4
01-25-2005 04:26 PM