Aeroforce gauges
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2007
Location: Edmonton, Alberta, Canada
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Aeroforce gauges
Ok so I've been looking at buying an Aeroforce gauge (maybe two) and I want to know like what do I have to consider when I purchase it?
Like is it actually plug n' play, what do I plug it in to, do I have cut anything(I want to put them in the driver side vents on the right) and just anything that I should keep in mind??
Like is it actually plug n' play, what do I plug it in to, do I have cut anything(I want to put them in the driver side vents on the right) and just anything that I should keep in mind??
#2
Here'* a good install tutorial if you haven't already seen it:
http://www.bonnevilleclub.com/forum/...ic.php?t=38725
I may have heard the new ones get their power from the diagnostic port (down by the driver'* footwell) and you don't even need to tap it elsewhere.
Even if you need to tap a power source, it'* super easy. If you can install a stereo this would be cake.
http://www.bonnevilleclub.com/forum/...ic.php?t=38725
I may have heard the new ones get their power from the diagnostic port (down by the driver'* footwell) and you don't even need to tap it elsewhere.
Even if you need to tap a power source, it'* super easy. If you can install a stereo this would be cake.
#3
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
They install easy. Just plug it in and yoru set. The only thing you may pave a problem with is teh power. Mine worked, but only once. I had to get power from a different location. The OBD2 conection didn't work on my car. Didn't take to long.
#4
Yes a very straightforward install. You tie the power supply into the HUD power (brown wire) and a ground. The main connection plugs into your computer port under the dash by your left leg.
Turns on automatically with the key in run position.
One of my favourite mods.
Turns on automatically with the key in run position.
One of my favourite mods.
#5
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2007
Location: Edmonton, Alberta, Canada
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
So is it long enough to reach the HUD wire if I put it into the right side vents?
And if I get two of them, do I have to do anything to sinc them?
And is there any sensors to install?
And if I get two of them, do I have to do anything to sinc them?
And is there any sensors to install?
#6
So is it long enough to reach the HUD wire if I put it into the right side vents?
And if I get two of them, do I have to do anything to sinc them?
And is there any sensors to install?
And if I get two of them, do I have to do anything to sinc them?
And is there any sensors to install?
If you get two of them, you have to let them know so they synch them at the factory. No sensors required, just plug and play. :P
Thread
Thread Starter
Forum
Replies
Last Post
GonneVille
Performance, Brainstorming & Tuning
4
04-07-2008 12:35 AM