Everything Electrical & Electronic Have an electrical problem? Lighting, Alternators, gauges, DIC, HUD, etc? Post it here. Please post Audio problems in the Audio forum, and Engine control problems in the appropriate Mechanical forum for your year.

98 ssei HUD doesnt work.

Thread Tools
 
Search this Thread
 
Old 09-16-2009, 08:31 PM
  #1  
Junior Member
Thread Starter
 
Philip L's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Philip L is on a distinguished road
Default 98 ssei HUD doesnt work.

Well I just bought a 98' Bonneville ssei, a day or two ago, and the HUD didn't work when I bought it. looking through the owners manual, I found the page that talks about the HUD, and it said on the bottom of the list (the top 4 things in the list can't be the problem) "A fuse in the fuse panel may be blown. See "Fuses and Circuit Breakers" in the Index.

So I turn to page 6-59, and... sure it lists the fuses, but it doesn't kindly list the location of the fuse that the HUD is on.

thanks in advance.
Old 09-17-2009, 08:01 AM
  #2  
DINOSAURUS BOOSTUS

Expert Gearhead
 
BillBoost37's Avatar
 
Join Date: Mar 2005
Location: Enfield, CT
Posts: 41,391
Likes: 0
Received 8 Likes on 8 Posts
BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
Default

Usually the hud problems aren't the fuse.

Try adjusting the up/down for a few minutes and put the brightness to max. At night look down from outside the car for any glow in the hud. Any glow should indicate that the adjustment is not where you can see it.
Old 09-17-2009, 08:53 AM
  #3  
Junior Member
Thread Starter
 
Philip L's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Philip L is on a distinguished road
Default

but... I've already tried that...
Old 09-17-2009, 08:57 AM
  #4  
DINOSAURUS BOOSTUS

Expert Gearhead
 
BillBoost37's Avatar
 
Join Date: Mar 2005
Location: Enfield, CT
Posts: 41,391
Likes: 0
Received 8 Likes on 8 Posts
BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
Default

You hadn't mentioned and it'* the most common. There goes my easy answer for the day.

I'd look up the fuse, but no fsm nearby.
Old 09-17-2009, 12:21 PM
  #5  
Junior Member
Thread Starter
 
Philip L's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Philip L is on a distinguished road
Default

well... i now officially feel like an idiot -.-

apparently the HUD was pegged as high up as it could go... and i was trying to make it go up... works fine now...
Old 09-17-2009, 01:42 PM
  #6  
Senior Member
Posts like a Turbo
 
tayl5645's Avatar
 
Join Date: Jul 2009
Location: Flint, MI
Posts: 372
Likes: 0
Received 0 Likes on 0 Posts
tayl5645 is on a distinguished road
Default

Ha dont feel bad when i took my car in for work and got it back it took me about a week to figure it out and it was the same thing!
Old 09-17-2009, 02:05 PM
  #7  
DINOSAURUS BOOSTUS

Expert Gearhead
 
BillBoost37's Avatar
 
Join Date: Mar 2005
Location: Enfield, CT
Posts: 41,391
Likes: 0
Received 8 Likes on 8 Posts
BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
Default

Nothing idiot about it. When I picked up my car I had to diagnose it. It wouldn't move at first and I couldn't see the image. A bit of goofing around and it moved again.

Presto.. easy and simple fix.
Old 09-18-2009, 05:09 PM
  #8  
Junior Member
Thread Starter
 
Philip L's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Philip L is on a distinguished road
Default

Well perhaps I should have named my thread "a few things wrong with my bonneville."

prob# 2

I can't raise and lower my seat, because the motor that lowers the back part of the seat doesn't do anything, so my seat just tilts forward.

looking under the seat in an awkward position I believe i have located the problem. one of the two large electric motors under the seat has a wire sticking out the back that isn't connected to anything, but I can't see where it is supposed to go. anyone know where I can find a wiring diagram or something for the seats?

side note: on the right side of my seat (when sitting in it) there is a bar that seems to come from the seat belt button thing, and is just hanging there in the middle of nowhere, anyone know what that might be?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ho0dbridge4lyf87
Everything Electrical & Electronic
13
05-26-2006 09:47 PM
matt_landon
1992-1999
1
06-30-2004 05:20 PM
Vio_late
Audio (and aftermarket electronics)
0
04-06-2004 04:13 PM
Vio_late
Audio (and aftermarket electronics)
0
04-06-2004 04:12 PM
bonnieman92
Everything Electrical & Electronic
3
03-02-2004 10:51 AM



Quick Reply: 98 ssei HUD doesnt work.



All times are GMT -4. The time now is 04:05 PM.