guages turning off by unexpectedly while driving?
05-05-2005, 02:39 AM
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jan 2004
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
guages turning off by unexpectedly while driving?
this is an annoying problem that hasn't happened until today....and 3 times at that. while driving all of the guages on the right side will turn off and the chime rings three times, and the trip ODO resets. this is really annoying ecspecially since i'm delivering pizza (get paid by the mile) and then all the sudden my trip ODO is back at 0 miles.
why would it do this?
why would it do this?
05-05-2005, 05:37 AM
#3
Senior Member
Posts like a Turbo
Join Date: Dec 2004
Location: Zelienople, Pennsylvania
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Old electronics (come on.. we come from W-body, we should know all about those). I got in my car earlier and the ECC didn't work at all. It just had 3 dashes on the screen and refused to do anything but blow hot-*** air out at full blast. I turned the car off for 10 seconds, started it back up and it all worked normal.
05-05-2005, 07:36 AM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Try following the steps in Techinfo to pull the gauges. (Personally I found dropping the steering column unnecessary) and check the connectors on the back of the cluster. If those seem intact then pull the gauges out and pull the cluster apart. (Black screws can stay in...they only hold the connectors to the boards) check boards over for corrosion, broken solder joints or burnt parts. Probably just a bad connection that will be fixed when you take apart and put it back together.
05-05-2005, 09:17 AM
#5
Senior Member
Certified Car Nut
So moved...
This could also be a dying alternator/battery combination. Seen it several times in person and here. Could also be bad connections. Get your batt/alt tested for free at Autozone or somewhere before ripping the dash apart. That'* a pain.
This could also be a dying alternator/battery combination. Seen it several times in person and here. Could also be bad connections. Get your batt/alt tested for free at Autozone or somewhere before ripping the dash apart. That'* a pain.
05-05-2005, 01:37 PM
#6
Guest
Posts: n/a
Originally Posted by jwikoff99
So moved...
This could also be a dying alternator/battery combination. Seen it several times in person and here. Could also be bad connections. Get your batt/alt tested for free at Autozone or somewhere before ripping the dash apart. That'* a pain.
This could also be a dying alternator/battery combination. Seen it several times in person and here. Could also be bad connections. Get your batt/alt tested for free at Autozone or somewhere before ripping the dash apart. That'* a pain.
what the alternator putting out? Should be at the extreme least 12.6 or better... Most should be in the 13.5-14.5 range...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
05-05-2005, 04:14 PM
#7
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jan 2004
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
my gauge usually reads about 14.3ish volts, but i haven't checked it with my digital voltmeter yet.
btw, i noticed that the steering column is getting loose....a bolt even fell on the floor
the steering wheel vibrates like crazy when driving on the highway. do you guys think this could have something to do with the problem? hopefully it won't be too hard to replace the bolt and tighten the column back up.
thanks again for the help guys.
btw, i noticed that the steering column is getting loose....a bolt even fell on the floor
the steering wheel vibrates like crazy when driving on the highway. do you guys think this could have something to do with the problem? hopefully it won't be too hard to replace the bolt and tighten the column back up.thanks again for the help guys.
05-06-2005, 12:56 PM
#8
Guest
Posts: n/a
was it a Torx bolt?
The steering colom will have to be taken apart to repair that problem... These should be 4 bolts that hold the internals together
And The airbag will have to be removed ( Unless you are a pro, don't attempt this )
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
The steering colom will have to be taken apart to repair that problem... These should be 4 bolts that hold the internals together
And The airbag will have to be removed ( Unless you are a pro, don't attempt this )
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
05-06-2005, 01:13 PM
#9
DINOSAURUS BOOSTUS
Expert Gearhead
JR I'm not following, can you please explain a little further what you are thinking the steering column vibration is. (Unless it'* time for me to hit the eye doctor again...) I didn't read anything in the post about why the column should need to come apart if he'* got vibration that loosened the column.
Wouldn't he need to tighten the column and look for any broken or pinched wires since this is in the same proximately as the cluster?
Wouldn't he need to tighten the column and look for any broken or pinched wires since this is in the same proximately as the cluster?
05-06-2005, 01:17 PM
#10
Guest
Posts: n/a
Depends on where the bolt came out... Thats whay I was asking if it was a Torx bolt...
If he has a vibration in the wheel, say a jiggle of sorts than he may need to have the tires balanced...
It almost sounds as if the steering colum has become loose on the inside... The bolts for that are not fun to get to either... I have seen this happn on several GM steering colums... Not mine( Thank God )...
The cluster its self may be having some issues and may need to be removed to clean the connector pins on the back of the cluster... Either that or the cluster may be failing...
If the colum is loose, it may be possible that the wires inside the colum could break, causing the car not to start( VATS )... Ground out and shut off intermintently.... Usually if anything like that happens all of the gages will drop... So its hard to say..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
If he has a vibration in the wheel, say a jiggle of sorts than he may need to have the tires balanced...
It almost sounds as if the steering colum has become loose on the inside... The bolts for that are not fun to get to either... I have seen this happn on several GM steering colums... Not mine( Thank God )...
The cluster its self may be having some issues and may need to be removed to clean the connector pins on the back of the cluster... Either that or the cluster may be failing...
If the colum is loose, it may be possible that the wires inside the colum could break, causing the car not to start( VATS )... Ground out and shut off intermintently.... Usually if anything like that happens all of the gages will drop... So its hard to say..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote