fog light installation?
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2004
Location: Central NJ
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
fog light installation?
i got me some cyberwhites cuz they were the only round fogd i cud find with a clear lense but the bracket it came with doesnt look like itll take to fog port, how have you guys installled your fogs?
#5
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2004
Location: Central NJ
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
ok now i dunno wut u mean, the stock housing doesnt look adjustable, just up and down for the existing fogs, which is a screw thatwill be useless once i take out the old fogs
#9
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2004
Location: Central NJ
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
thats 1 problem solved, thank, would anyone happen to know if there is a way to make the new fogs work on the old switch BUT also to make that switch independant of the lighitng module, so i cud use it whenever
#10
Senior Member
True Car Nut
Join Date: Dec 2003
Location: Corn Fields, IN
Posts: 2,767
Likes: 0
Received 0 Likes
on
0 Posts
not sure why you would want to do that. the fogs come on with the park lights...you don't have to have the lows on. If you still want to do that, you'd have to find the foglight switch wire before it goes up the A pillar, then connect it to a Hot In Run source...i don't know if that foglight switch activates a relay or not...it sure gets warm when the fogs are on.