How can I make this 96 traction control button work
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jan 2007
Location: Florence, Kentucky
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
How can I make this 96 traction control button work
Ive got a 92 bonne SSE. The traction and performance shift buttons were not working so I went to the junkyard. All I could find was one out of a 96 I think it was. I bought it got it home and then noticed that it has plug ins. My wires are made directly into the circuit board. Also mine only has 4 wires and then 2 wires. The new switch has 6 wires and 4 wires. Is there any way I can wire this switch in using my wires. On another note Ive only had the car for a little over a month and Im discovering it needs more work than I thought. So I guess Ill be asking everyone for help often. Thanks in advance because I know you guys can help me.
#2
Junior Member
Posts like a Ricer Type-R
You want the switch pod from a 92-93 (maybe 94?) for plug/play. The extra wires on the 96 pod are for CCR, which you don't have.
I know the pods in my two cars (93/95) are not compatible. Contact billboost37 if you need a new early-gen pod. Keep in mind, he'* enroute to Ohio right now to have his trans rebuilt at INTENSE. He may respond quickly, but won't be able to ship to you until thursday at the soonest.
I know the pods in my two cars (93/95) are not compatible. Contact billboost37 if you need a new early-gen pod. Keep in mind, he'* enroute to Ohio right now to have his trans rebuilt at INTENSE. He may respond quickly, but won't be able to ship to you until thursday at the soonest.
Thread
Thread Starter
Forum
Replies
Last Post
Merlin 91/97
Performance, Brainstorming & Tuning
50
04-28-2005 01:02 AM