NEED HELP!!!!!
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2003
Location: Right in front of you
Posts: 7,965
Likes: 0
Received 0 Likes
on
0 Posts
NEED HELP!!!!!
the 1994 SSE has been having problems. sometimes it will start, sometimes it won't. Code reader indicates trouble code of: P1670 and description from code reader is QDM4. We replaced computer but its only partially fixed the problem. Sometimes the MAF sensor has to be pulled to crank it and sometimes it has to be plugged back in to get it to crank.
I am trying to avoid having to put it in the shop AGAIN and would really appreciate any help anyone can offer me!!
I am trying to avoid having to put it in the shop AGAIN and would really appreciate any help anyone can offer me!!
#4
Junior Member
Posts like a Ricer Type-R
I don't see a DTC listing that matches that code. Are you sure about it? Does your code reader have anything specific on that number?
I don't have my scantool to refer to......I left it with DrJay in WA. Maybe he can chime in here.
I don't have my scantool to refer to......I left it with DrJay in WA. Maybe he can chime in here.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2003
Location: Right in front of you
Posts: 7,965
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
I don't see a DTC listing that matches that code. Are you sure about it? Does your code reader have anything specific on that number?
I don't have my scantool to refer to......I left it with DrJay in WA. Maybe he can chime in here.
I don't have my scantool to refer to......I left it with DrJay in WA. Maybe he can chime in here.
#6
Junior Member
Posts like a Ricer Type-R
I'm only aware of 2 QDM'*. Unless the 94/95 hybrid PCM'* are different. (Quad Driver Modules).
I've contacted DrJay and asked him to check my scantool and docs.
I've contacted DrJay and asked him to check my scantool and docs.
#7
Senior Member
Certified GM nut
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes
on
0 Posts
Quad driver 4 - The quad driver is located inside the PCM. The quad driver consists of four separate electronic switches used by the PCM to energize verious solenoids and relays.
The PCM checks the condition of the quad driver switch output and displays either LOW (switch is on) or HIGH (switch is off).
Note that this display is indicating the actual condition of the switch output and NOT the command given to the switch by the PCM.
DTC P1670 - Driver 4
Linky linky: http://www.troublecodes.net/articles/quaddriver.shtml
The PCM checks the condition of the quad driver switch output and displays either LOW (switch is on) or HIGH (switch is off).
Note that this display is indicating the actual condition of the switch output and NOT the command given to the switch by the PCM.
DTC P1670 - Driver 4
Linky linky: http://www.troublecodes.net/articles/quaddriver.shtml
Thread
Thread Starter
Forum
Replies
Last Post
Custom88
Everything Electrical & Electronic
10
06-22-2004 10:58 PM