Everything Electrical & Electronic Have an electrical problem? Lighting, Alternators, gauges, DIC, HUD, etc? Post it here. Please post Audio problems in the Audio forum, and Engine control problems in the appropriate Mechanical forum for your year.

Converting OBD II connector to OBD I on 95 Bonne

Old 11-28-2004, 06:24 PM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
dumbsioux's Avatar
 
Join Date: Sep 2004
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
dumbsioux is on a distinguished road
Default Converting OBD II connector to OBD I on 95 Bonne

I have a 95 Bonneville, and I know that it has a OBD I interface but has an OBD II connector. Is there any way I can convert the OBD II connector to OBD I? I have a OBD connector but do not know where to hook the wires up. Thanks in advanced!
Old 11-28-2004, 06:27 PM
  #2  
Senior Member
True Car Nut
 
LakevilleSSEi's Avatar
 
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes on 0 Posts
LakevilleSSEi is on a distinguished road
Default

I think it could be possible, but I dunno if I would do it. Mainly because I think there'* a lot of stuff that you could mess up if you weren't carefull, and the reliability of the interface after messing with it could just be a PITA. I personally would just leave it alone.
Old 11-28-2004, 06:29 PM
  #3  
Senior Member
True Car Nut
 
OLBlueEyesBonne's Avatar
 
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes on 0 Posts
OLBlueEyesBonne is on a distinguished road
Default

You might be able to put the plug on, but pulling codes will be kinda impossible. You will still need a good scan tool that consist'* of more than a paper clip in a snazzy box to pull the codes. I'd suggest against doing this.
Old 11-28-2004, 07:27 PM
  #4  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Don't muck with it. Get the right scantool and cable.
Old 11-28-2004, 07:33 PM
  #5  
Member
Posts like a V-Tak
Thread Starter
 
dumbsioux's Avatar
 
Join Date: Sep 2004
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
dumbsioux is on a distinguished road
Default

What about this:



http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

I would use my laptop and write my own file.
Old 11-28-2004, 07:42 PM
  #6  
Senior Member
True Car Nut
 
opensourceguy's Avatar
 
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes on 0 Posts
opensourceguy is on a distinguished road
Default

Originally Posted by eBay
Please note that this cable cannot be used alone, you need some sort of hardware OBD-2 interface
.

Not gonna work. You just need to splurge for an OBDI scantool, that has an OBDII connector.


-justin
Old 11-28-2004, 08:01 PM
  #7  
Member
Posts like a V-Tak
Thread Starter
 
dumbsioux's Avatar
 
Join Date: Sep 2004
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
dumbsioux is on a distinguished road
Default

I have an obd I connector but i just need some way for it to convert the connector.
Old 11-29-2004, 11:39 AM
  #8  
Junior Member
Posts like a Ricer Type-R
 
95guy's Avatar
 
Join Date: Jun 2004
Location: SW Ohio
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
95guy is on a distinguished road
Default

http://www.autoxray.com/95wiring.htm

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Drifter420
Everything Electrical & Electronic
6
12-30-2017 10:25 PM
sodbuster65
Everything Electrical & Electronic
8
07-24-2010 05:52 AM
BonneMeMN
Performance, Brainstorming & Tuning
8
10-05-2004 05:22 PM
94SSEgold
1992-1999
5
03-01-2004 03:54 PM
dspman67
1992-1999
15
07-03-2003 06:04 PM


Thread Tools
Search this Thread
Quick Reply: Converting OBD II connector to OBD I on 95 Bonne



All times are GMT -4. The time now is 04:57 AM.