Birthday
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Nov 2005
Location: Nebraska
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Birthday
My mom gave me 100 bucks and said.......go get what u want......so i wandered into the auto section at walmart and picked up some silverstars.......is there instructions to take the headlights out in techinfo?
#2
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
No instructions in tech info....but your owners manual tells you. Two 10mm bolts on the inner portion of each headlight bracket. Then, slide the whole assembly (corner lights, too) outward toward the edges of the car (there are two pins on the back side of the cornering lghts that are in holes on the body structure, and the cornering lights are attached to the headlight. That is why the whole assembly needs to slide out to clear the pins from the holes)
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Originally Posted by 96bonniessei
so i wont have to reset the position of the h/l when i put them back in right?
#6
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Nov 2005
Location: Nebraska
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
i tried tonight....i can't pull the damn thing out.....i took the 2 bolts out, then pulled outwards and the corner light is like its stuck....and i cant reach in to undo anything holding onto the corner light
#7
Senior Member
True Car Nut
Join Date: Oct 2003
Location: Pittsburgh, Pa.
Posts: 7,551
Likes: 0
Received 0 Likes
on
0 Posts
if you're afraid to pull the whole assembly out there is a philips screw in between the headlamp and the corner marker as you're looking down from the top.
#8
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Nov 2005
Location: Nebraska
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
thanks, i did notice that, so i may do that
but how hard of pull does it take to get the whole unit out? including corner lamps? cuz i pulled pretty hard and it didnt come out
but how hard of pull does it take to get the whole unit out? including corner lamps? cuz i pulled pretty hard and it didnt come out
#9
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Nov 2005
Location: Nebraska
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
thanks for ur help guys, i ended up unscrewing the corner light, pulling it out, and then pulling the headlight unit out.....much easier IMO....
now i got silverstars
now i got silverstars
Thread
Thread Starter
Forum
Replies
Last Post