Programming options for a 1993 SE
#1
Junior Member
Thread Starter
Join Date: Jul 2004
Location: Bradley, IL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Programming options for a 1993 SE
I recently had the starter rebuilt on the car, before taking the car in for service, when the igniton was turned off or on, the doors would unlock or lock. Now after getting the car back, it no longer does that. I am figuring there is someway of programming that, and that when the battery was disconnected for the repairs, the programming was cleared? I just bought the car about two months ago, the keyless entry is a stock two-button system. Any help would be greatly apprecciated.
John Maass
Bradley, IL
mawsgs99@comcast.net
John Maass
Bradley, IL
mawsgs99@comcast.net
#2
Junior Member
Posts like a Ricer Type-R
There is no way to program an OBD1 Eprom in the car. Disconnecting the battery only clears fault codes. Nothing else.
Your hickup could have been caused by a bad ground, weak battery, moisture, or a bug.
Your hickup could have been caused by a bad ground, weak battery, moisture, or a bug.
#3
Junior Member
Thread Starter
Join Date: Jul 2004
Location: Bradley, IL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Thank you for the reply, wasn't sure about it, and like you said must of been some kind of bug or something everything back to normal now, doors lock when ignition tunred on, and vice-versa.
John
John
Thread
Thread Starter
Forum
Replies
Last Post
Syn
General GM Chat
2
04-07-2010 10:29 AM
sickofthinking
1992-1999
4
01-25-2005 04:26 PM