92 SSE, front power windows inop, rear windows work fine
 

no clicking or nothing on front operation, from both driver and pass switch. Rears are fine from driver and rear doors.

Don't tell me to check ground bus

https://i5.photobucket.com/albums/y1...E/100_1931.jpg
https://i5.photobucket.com/albums/y1...E/100_1930.jpg
https://i5.photobucket.com/albums/y1...E/100_1929.jpg

This is the condition I found them in :shock: :D

Don't have 92 FSM's and don't know if the circuitry is basically the same for the 99 (which I have)

I can't help myself, did you check the ground buss - -on the other side?
PM me with an email address & I'll send you a diagram for the 92.

the right one looked identical to the left. When I went to verify operations, they all worked except the drivers. Guess I'll tear into the door.. maybe.. later...

Check the harnesses/swtiches in the door panels. Wiring may have been caught too.

I poked thru my FSM and found nothing out of the ordinary.

Maybe the switches.. using a multimeter double check that the switches (esp driverside) is working fully.