visor lights
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2011
Location: GILBERT AZ.
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
visor lights
when i purchased my 94 bonneville, both lights on the visors dont work. to my surprise, it looks like the bulbs are old school fuses ? is that what they are ? or is this a dealer item ?
thanks
thanks
#2
Senior Member
True Car Nut
I am not sure what bulb they actually are, but they are not fuses. Usually those lights are not at fault, because they are used so little. I would be inclined to check the switches and other wiring, as those have a tendency to get finicky after 15 years or so.
#3
Junior Member
Join Date: Mar 2011
Location: Chandler AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Same problem, ive got a 92 Bonneville ssei, the visor lights wont work i don't think they've ever been used since ive had the car... The seat settings on the passenger side don't work either, so im thinking i have a big wiring problem..
#5
Administratus Emeritus
Certified Car Nut
It'* bulb 563
You can get it here: http://bulbster.com/lightbulbs/563-p...FYXc4AodsClPrw
Or take the bulb with you to Advance or Auto Zone and they probably have it.
Moved to Bonneville Mechanical/Electrical for better visibilty and search indexing.
You can get it here: http://bulbster.com/lightbulbs/563-p...FYXc4AodsClPrw
Or take the bulb with you to Advance or Auto Zone and they probably have it.
Moved to Bonneville Mechanical/Electrical for better visibilty and search indexing.
#6
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2011
Location: GILBERT AZ.
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Thats weird, mine dont look like that at all.....mine look just like a regular fuse.
i'll post a pic later....thanks for the info venom
i'll post a pic later....thanks for the info venom
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2011
Location: GILBERT AZ.
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
well looking at these a little closer, there'* a fine very fine wire running through them and they look like there still intact....maybe ?
#9
Senior Member
Certified GM nut
Light bulbs and fuses test similarly: grab a multimeter and check the resistance from end to end. Infinite resistance and it'* blown. Anything else and it should be working.