Clearing Amber on 92-95 SSEi Tails.....
04-24-2006, 06:54 PM
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Clearing Amber on 92-95 SSEi Tails.....
Well i got a spare Tail from the Yard, and tryed something new to take it apart without DeLaming the Tail...
What you do is...
-Bake in a oven at 200 Degrees for 20Mins or so... (put them in right when you turn on)
-Then pry up or brake off the tabs.
-Then start to pull the Light aPart starting at the skinny end "With your Hands"
Keep on working around the whole light GENTLY pulling..... (DO NOT USE A SCREW DRIVER) and also se more then one or two fingurs to pull, i used 3-4....
and slowly! they will come apart... With out Delaming them....
Im going to get things ready for my Tails on my car them im going to de a step by step wright-up on how to do this...
PICS COMING SOON...
PICS COMING SOON...
What you do is...
-Bake in a oven at 200 Degrees for 20Mins or so... (put them in right when you turn on)
-Then pry up or brake off the tabs.
-Then start to pull the Light aPart starting at the skinny end "With your Hands"
Keep on working around the whole light GENTLY pulling..... (DO NOT USE A SCREW DRIVER) and also se more then one or two fingurs to pull, i used 3-4....
and slowly! they will come apart... With out Delaming them....
Im going to get things ready for my Tails on my car them im going to de a step by step wright-up on how to do this...
PICS COMING SOON...
PICS COMING SOON...
04-24-2006, 08:35 PM
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
driverjohn2005 did it as well with beautiful results.
i hope mine come out as good as his did...
04-24-2006, 10:34 PM
#5
Senior Member
True Car Nut
Join Date: Aug 2005
Posts: 5,798
Likes: 0
Received 0 Likes
on
0 Posts
Oh ya well i know how not to do it 
it all depends on were you place the screwdriver, when i put little pressure on it with the SD in the wrong place a huge amount of the tail delamed instantly
good thing im tinting them aswell 
it all depends on were you place the screwdriver, when i put little pressure on it with the SD in the wrong place a huge amount of the tail delamed instantly
good thing im tinting them aswell
Thread
Thread Starter
Forum
Replies
Last Post