Sunshade liner?
#1
Senior Member
Certified Car Nut
Thread Starter
Sunshade liner?
Has anyone'* sunroof shade upholstery fallen down? I absent-mindedly whacked a small spider on my sunshade and it left a small splat. I did my best to use very little pressure to get it off, but now it still looks flat, but if you touch it, you can tell there'* nothing holding it up behind it. The loose spot is the size of a quarter.
One of my worst fears for my car is the headliner falls, cause I know there is no stopping it.
One of my worst fears for my car is the headliner falls, cause I know there is no stopping it.
#4
Junior Member
Posts like a Ricer Type-R
Contact cement, but that'* not going to go through a syringe very well. Crap. Do it like I did my hoodliner, but you'll have to remove it and find matching material.
#5
Member
Posts like a V-Tak
Join Date: Aug 2005
Location: Port Charlotte, FL
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Just about my entire sunroof liner is coming down It was fine when I bought the car back in April, but during really heavy downpours some moisture gets in somehow. That'* how it started, and it'* just been getting worse. I don't know what to do about it... maybe just peel the entire thing off and glue it back on?
#6
Senior Member
True Car Nut
Join Date: Dec 2003
Location: Corn Fields, IN
Posts: 2,767
Likes: 0
Received 0 Likes
on
0 Posts
Recovering the sunroof shade is pretty easy because you can just pull it out without removing the glass or the headliner. (at least i could, and the shade on my aftermarket roof is much longer than factory)
#7
Originally Posted by John Deere Boy
Recovering the sunroof shade is pretty easy because you can just pull it out without removing the glass or the headliner. (at least i could, and my aftermarket roof is pretty similar to factory)
#8
Senior Member
True Car Nut
Join Date: Dec 2003
Location: Corn Fields, IN
Posts: 2,767
Likes: 0
Received 0 Likes
on
0 Posts
I guess there is too much difference. To get mine out, I opened the sunroof (up, not back) and pulled down on the center of the shade to get it past the catch and close it. Then I pushed up in the center until it bent enough that one side came out of the track.
Thread
Thread Starter
Forum
Replies
Last Post