New wire routing...you guys are gonna like this
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
New wire routing...you guys are gonna like this
With the PCM conversion, I did not need to route any control wiring over the supercharger...so I decided to reroute the ignition wires in their place. All that is, is aluminum L-channel, aluminum tabs, and some wrinkle paint
Comments...suggestions...let'* hear them!
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
Oh...so THAT'* why my pants keep falling down...nyuck nyuck nyuck.
Belts will be one of the last things to go on the motor...I needed them off when I redid my 'charger, and to make rerouting the new power cables easier. I might radius the edge facing the front to make it a bit more appealing, though I do like the raw, fabricated look of it.
Belts will be one of the last things to go on the motor...I needed them off when I redid my 'charger, and to make rerouting the new power cables easier. I might radius the edge facing the front to make it a bit more appealing, though I do like the raw, fabricated look of it.
#7
Senior Member
Posts like a Supercharger
Join Date: Jan 2008
Location: Orlando Florida
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
is that how long the #1 wire came or did you make that wire special.
Everytime i buy wires the #1 wire is shorter than....well nevermind
Everytime i buy wires the #1 wire is shorter than....well nevermind
#8
Senior Member
Posts like a Supercharger
Join Date: Jan 2008
Location: Orlando Florida
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
where are the Zilla Motorsports decals on your valve covers..LOL I really like that crinkled metal look...Might give mine a coat of paint if i ever had to take them off...
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by lunchboxx
where are the Zilla Motorsports decals on your valve covers..LOL I really like that crinkled metal look...Might give mine a coat of paint if i ever had to take them off...
Read Wrens post on this wrinkle stuff. It wouldn't benefit you unless you convert over to aluminum valve covers like we did. And while it looks good, it serves a higher purpose in heat dissipation...something us blown boys need.
Wake...yup, gonna paint me up some pulleys soon enough. But there are...other issues that need to be addressed first (like actually getting the car to run).