Door panels
 

Hey guys when i replaced my door speakers i stripped the pegs that hold the door panels to the doors. Any hot tips on how to go about fixing this?

clips
 

I did the same with my 95 ssei, i replaced the speakers and stripped out the plastic clips, you can get the clips at dealership for $12 for 10 clips it beter than hering the door rattling and stuff

they are also in the "HELP" section of your local Advance

ugh door panel clips. Hate 'em. Pulled them all, and put velco in it's place. Much easier. Velco is kinda expensive though.. so don't be surprised when it's like $10/yd. I really have no clue how much I paid for it, but I remember getting it on sale.


-justin

I hate the freakin things very poorly designed what is your window breaks and you need to get the panel off to replace it? gotta replace the clips. Thx for teh tips guys!

might have to try this. this should help get rid of alot of panel squeeking.

It works out great, because the velco isn't the support. It's the [for me, three] screws which bolt the panel to the door frame. Hell, I went several weeks without any clips, and just the screws. Nothing wrong with that either, but you can usually tell the door is clipless when you open it, because there is a gap between the door and the frame on the bottom.


-justin

Velco huh? I might consider velcro some day, but Advance has the clips cheap.

the clips are much better that a velcro alternative, the 92-99 door panel is much different than the 87-91

I have had my door off at least 5 times now and i have not relpced the plastic clips yet, and have no problems or squeaks

yea try the help section or napas balkamp section cost around 4 to 5$ a bag for the clips