1994 Bonneville Dash Project [UPDATE: Car PC Install]
Thread Starter
Senior Member
Posts like a Supercharger
Joined: May 2006
Posts: 160
Likes: 0
From: Vancouver
Yes, it is a car pc install. 
I had to chop the top area of the original din and a half area in order to fit the 4.5" tall screen. I managed to keep the sides as the visible area of the screen including the verticle line up of buttons in the original horizontal spacing. Then I had to relocate my deck down below to an unused area.
ORIGINAL
The Area I had to work with
The Idea I had of placement I had in mind.
After a couple cuts
I chose not to mount the screen flush for security sakes as well as sun glare, so I also had to learn to fibreglass to fill in the once inch depth I decided to mount it at.
Sanding
Bondo
Sanding
Primed
Screen cover
Painted and mounted
The screen setup
....More pictures to follow!
[/img]
I had to chop the top area of the original din and a half area in order to fit the 4.5" tall screen. I managed to keep the sides as the visible area of the screen including the verticle line up of buttons in the original horizontal spacing. Then I had to relocate my deck down below to an unused area.
ORIGINAL
The Area I had to work with
The Idea I had of placement I had in mind.
After a couple cuts
I chose not to mount the screen flush for security sakes as well as sun glare, so I also had to learn to fibreglass to fill in the once inch depth I decided to mount it at.
Sanding
Bondo
Sanding
Primed
Screen cover
Painted and mounted
The screen setup
....More pictures to follow!
[/img]
