![]() |
idle re-learn
I just replaced the IAC on a 2001 Malibu because of high idle problems. Still had problem after car got up to temp. Is there a re-learn process for this and if so could someone tell me how to do it.
Thanks for any help |
Idle relearn for a 2001? Not really....
More likely a bad connection at the harness connector, bad wire in the harness, or vac leak.... |
There is no idle learn process. Chances are the high idle was not related to the IAC. Like TII suggested, check for vacuum leaks.
|
Thanks for the help guys.
The directions that came with the IAC said that after reassemble the rpm may be high (1800-2000) and to drive it at 40 mph and that would cause the ECM to command the IAC to re-set. That's why I asked. I did wiggle the wires around while it was running to see if that caused any change. I also sprayed around the intake and anywhere that looked like a vacuum connection with carb. cleaner but didn't get anywhere with that.So I put it in the shop this afternoon and hopefully they,ll find the problem. thanks again |
| All times are GMT -4. The time now is 08:57 AM. |
© 2026 MH Sub I, LLC dba Internet Brands