EGR Valve Location
02-17-2014, 09:37 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
EGR Valve Location
Sorry guys im sure this has probably been posted before but does anyone have a diagram of where the EGR valve on a 3800 series II from a 2000 Impala might be.. Also is it easy to Change.. Thanks in Advance..
02-17-2014, 09:45 PM
#2
Retired
Certified Car Nut
This is your EGR valve...
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
Loveitdownsouth (02-17-2014)
02-17-2014, 09:45 PM
#3
Retired
Certified Car Nut
Couple bolts/nuts and its out. 13mm I believe.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
Loveitdownsouth (02-17-2014)
02-17-2014, 09:51 PM
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Ok thank you now im just on the rock auto site and i can only get the cheapest one but im not sure if it is the correct part number?? Sorry hope this isnt a hassle.. I just figured i would order from rock auto becuase i have ordered from there before and my local parts store wants like 250$ for the same part..
02-17-2014, 10:00 PM
#5
Retired
Certified Car Nut
No hassle at all Mark, that'* what we are here for.
Post the part #'* and we can tell if its the right one.
Post the part #'* and we can tell if its the right one.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
02-17-2014, 10:13 PM
#7
Retired
Certified Car Nut
Yep, looks like the right one. Make sure you inspect the EGR flex pipe going from the EGR to the lower manifold.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
Loveitdownsouth (02-17-2014)
02-17-2014, 10:15 PM
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
02-17-2014, 10:16 PM
#9
Retired
Certified Car Nut
If left alone, the part is fine, but if moved around due to removal, it tends to crack the folds in it. If you gentle, it will be fine.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
Loveitdownsouth (02-17-2014)
02-17-2014, 10:28 PM
#10
Junior Member
Posts like a Ricer Type-R
Thread Starter
Oh i see ok well i will have to check it tomorrow as i am still driving the car because i have no other way to work..