CEL with Mass air sensor code
#1
CEL with Mass air sensor code
Looking for some input, I have a 2006 Silverado 5.3L with the aluminum block. The truck has a K&N air intake and Flowmaster exhaust system on it. While under load or heavy throttle, the CEL comes on for mass air flow sensor. Is there a recommended upgrade sensor to install to fix this issue? I've tried cleaning it with no positive results.
The following users liked this post:
Mike (03-26-2015)
#3
Senior Member
Posts like a Turbo
^^^^^^^^^^What he said^^^^^^^^^
I have also seen on some occasions were an aftermarket air filter will cause higher than normal readings, causing the pcm too set the light on.
I have also seen on some occasions were an aftermarket air filter will cause higher than normal readings, causing the pcm too set the light on.
The following users liked this post:
Mike (03-26-2015)
#4
Retired
X3. Too much oil on filters can cause havoc on MAF'*.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Thread
Thread Starter
Forum
Replies
Last Post
cballweg
Bonneville GXP/ Northstar Powered Cars
6
05-04-2006 02:37 AM