Ok my brother has an 06 impala ss. We gotta change the tranny fluid filter ect, new oil pan gasket, new pads and rotors. Is do we have torque settings any where for this car? I am used to doing it on the bonneville but haven't had to in sometime so I should be able to figure out what is what. Any pointers and pics are always welcome.

Torque specs for what exactly?

cant find the trans specs, in the manual, but oil pan procedure says you have to jack up the engine with the spreader tool to get off the pan

Install the oil pan, gasket, and bolts to the engine block. Tighten the oil pan and oil pan-to-front cover bolts to 18 ft. lbs. (25 Nm). Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).

Wow was hoping it would be as easy as the Trans filter change. Guess not.

We got the oil pan bolts, what about trans pan bolts?

Man, I almost gave you the specs for a 2003 SSEi.

Sorry, I do not have them for the 2006 Imp. But, knowing our luck, they are probably both the same transmission anyway.