I'm trying to figure out where a wire behind the light control switch fits into. It'* labeled with a PED 7. has red and white stripes. It'* an 06 Impala IP 3.9L If anyone has diagrams or knows where the wire goes, would appreciate it!

Here'* the pictures:

If it wasn't connected to anything, then it wasn't suppose to be. And PED 7 is the mfgr stamp, not the actual connector identifier per schematics.

Most manufacturers use a common harness to cut down on cost. 1 harness, multiple platforms with different possibilities for components.

As Mike said they used same harness for multiple applications that wire is for a car equipped with the ability to deactivate the traction control,in cars that have that function the switch is under the illum **** just like the trunk button just on the bottom..No reason to be alarmed my 06 SS has that ability and switch

This use to an ex-cop car so I was looking around trying to see if it came with an alarm system and stumbled onto this wire. Do the police versions have the option to turn the traction control off?

What im saying bud is every impala has the same wiring harness when it comes to the interior as its cheaper and more efficent for manufactures to build and install a single harness weather it had the option or not..for example 96-99 bonnevilles are pretty much all wired for HUD weather they have it or not