Park Ave Seat Adjuster Panel
1 Attachment(s)
After having a passenger for 500 miles, this is what happened...Darn cheap plastics on this car!
I guess the weight of passenger compressed the foam, and it had pop a part a phobia? Appears to be coming apart at the seam LOL... https://www.gmforum.com/attachment.p...ine=1397767145 Ok did something break or is there a secret to re-install this thing properly?:confused: |
I think they just pop back in there. Unless the tabs are broken.
|
I tried pushing it in numerous times, but when it stops raining, I will have to get a better look Mike..
If the tabs are broken maybe drill a hole and some ole fishing line through the seat to tie it back up is in order LOL... |
The plastic tabs have metal clips on them to secure it to the seats...... have used "stylish" screws to secure the escutcheon....
|
'Stylish" screws? I gotta see a pic of these things.
|
Ha-ha, Mike......whatever I have handy...then I go into the Parts Dept, and get some touch-up paint close to the color of the plate, and paint the heads......
|
Looks like I will be attempting one single drill hole & screw install.
There is a small amount of solid wood just above the white electrical connector area to hit. |
You gotta do what ya gotta do.
|
1 Attachment(s)
https://www.gmforum.com/attachment.p...ine=1397932389
Hope you hit the wood, and not the electrical connector! |
1 Attachment(s)
|
1 Attachment(s)
You guys are funny!!
I made it so by engaging the drill today. I drilled it from back of panel forwards to ensure I did not hit electrical connectors. https://www.gmforum.com/attachment.p...ine=1398050724 Now seat panel secure but not pretty...yet..LOL.. |
At least it looks like it is holding it. :thumbup2
|
welcome to the club, art!, of both my park avenues and my dads, not one has an in tact side plastic. all 6 of them busted off! im no tank at 180 lbs either...... damn engineers!
in the old car, i used grey zip ties, but that didnt look very nice. in the new car i plan on buying some sheet metal screws with allen heads if i can find some.ill probably do a little border of 3 on top 3 on bottom and 2 at the front and back so it looks (almost) factory. also- look out removing the b pillar covers. they use flimsy 1/8" thick tabs about 2 inches long. and only 3 of them. seems like i break the tabs every time i take one off. ive had to replace them about 50% of the times ive had them off. |
Doesn't look as "stylish" as mine!:w3
|
All times are GMT -4. The time now is 02:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands