Buick When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.

Drivers window works half the time and radio won't turn off

Thread Tools
 
Search this Thread
 
Old 02-13-2018, 04:58 PM
  #1  
Junior Member
Thread Starter
 
hairydog03's Avatar
 
Join Date: Feb 2018
Posts: 6
Received 0 Likes on 0 Posts
hairydog03 is on a distinguished road
Default Drivers window works half the time and radio won't turn off

2012 Buick Regal. This issue has been going on for a couple months now and its very aggravating. All the others windows work right now besides the drivers side front and the radio will not turn off when I open up the door. I did some research on it and I think I've narrowed it down to either the RAP relay or a BCM problem. Anyone else have this problem? Please chime in with some solutions
Old 02-13-2018, 10:52 PM
  #2  
Senior Member

True Car Nut
 
Tech II's Avatar
 
Join Date: Feb 2014
Location: Worcester, Ma.
Posts: 2,878
Received 1,084 Likes on 832 Posts
Tech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond repute
Default

Would help to know what the exact problem with the driver'* window is.....It won't go down? It won't go up? It only goes partway up/down?

Looking at the wiring diagram(working with a 2011 diagram), the BCM has nothing to do with the driver'* side motor, only the other three......however the BCM does control the RAP relay......we could have a bad BCM, or we could have bad signal into the BCM from the door latch assembly, causing the BCM not to know the door is opened...........

If I am reading this wiring diagram right, we are dealing with logic motors......diagnosis of this system is made easy with a Tech II scanner.....If the window is not working at all, we could have a bad motor, bad logic board, open comm line, etc.

this is how logic motors work, let'* say your driver'* side switch activates the right front window down......the switch will send a logic signal to all window motors to go down......but only the logic motor for the rf window will recognize it and then the circuit board will power the motor appropriately.....

Codes could be set in the form of "B" and "U" codes....

Last edited by Tech II; 02-13-2018 at 10:55 PM.
The following users liked this post:
Soft Ride (02-16-2018)
Old 02-16-2018, 12:48 PM
  #3  
Junior Member
Thread Starter
 
hairydog03's Avatar
 
Join Date: Feb 2018
Posts: 6
Received 0 Likes on 0 Posts
hairydog03 is on a distinguished road
Default

Originally Posted by Tech II
Would help to know what the exact problem with the driver'* window is.....It won't go down? It won't go up? It only goes partway up/down?

Looking at the wiring diagram(working with a 2011 diagram), the BCM has nothing to do with the driver'* side motor, only the other three......however the BCM does control the RAP relay......we could have a bad BCM, or we could have bad signal into the BCM from the door latch assembly, causing the BCM not to know the door is opened...........

If I am reading this wiring diagram right, we are dealing with logic motors......diagnosis of this system is made easy with a Tech II scanner.....If the window is not working at all, we could have a bad motor, bad logic board, open comm line, etc.

this is how logic motors work, let'* say your driver'* side switch activates the right front window down......the switch will send a logic signal to all window motors to go down......but only the logic motor for the rf window will recognize it and then the circuit board will power the motor appropriately.....

Codes could be set in the form of "B" and "U" codes....
I could've been a little more helpful. For the past few months the drivers window will not work at all for a couple months and then suddenly start working again and the radio will not turn off when the door is opened and the car is off. It does both of these problems at the same time. I did some research on it and it seems to me the RAP relay could be an issue or as you said the BCM. Maybe a loose wire or connection somewhere?
Old 02-16-2018, 12:54 PM
  #4  
Junior Member
Thread Starter
 
hairydog03's Avatar
 
Join Date: Feb 2018
Posts: 6
Received 0 Likes on 0 Posts
hairydog03 is on a distinguished road
Default

Originally Posted by Tech II
Would help to know what the exact problem with the driver'* window is.....It won't go down? It won't go up? It only goes partway up/down?

Looking at the wiring diagram(working with a 2011 diagram), the BCM has nothing to do with the driver'* side motor, only the other three......however the BCM does control the RAP relay......we could have a bad BCM, or we could have bad signal into the BCM from the door latch assembly, causing the BCM not to know the door is opened...........

If I am reading this wiring diagram right, we are dealing with logic motors......diagnosis of this system is made easy with a Tech II scanner.....If the window is not working at all, we could have a bad motor, bad logic board, open comm line, etc.

this is how logic motors work, let'* say your driver'* side switch activates the right front window down......the switch will send a logic signal to all window motors to go down......but only the logic motor for the rf window will recognize it and then the circuit board will power the motor appropriately.....

Codes could be set in the form of "B" and "U" codes....
I could have been more helpful. The drivers window will work every once in a while, maybe every other month. As this problem occurs the radio will not turn of when the door is open and the car is off. Both problems happen at the same time. I've had the door panel off and see no loose connections or anything. Do you think maybe a re-flash of the BCM could help?
Old 02-16-2018, 04:25 PM
  #5  
Senior Member


True Car Nut
 
Soft Ride's Avatar
 
Join Date: Jan 2012
Location: BC Canada
Posts: 4,905
Received 586 Likes on 515 Posts
Soft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud of
Default

Just want to make sure we talking about the factory radio, or was an aftermarket radio installed?
It may be best to allow GM to try to diagnose this situation with their TechII scanner.
Hopefully with an hour or two for labor, they may be able to pinpoint the problem.
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!
Old 02-16-2018, 09:21 PM
  #6  
Senior Member

True Car Nut
 
Tech II's Avatar
 
Join Date: Feb 2014
Location: Worcester, Ma.
Posts: 2,878
Received 1,084 Likes on 832 Posts
Tech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond repute
Default

With a Tech II scanner, you should be able to diagnose both problems in 0.5-1.0 hours, if you know what you are doing....

One thing I would try is swapping the RAP relay with another to see if this fixes the problem....correction, it is the battery saver relay, not the rap relay, that powers the radio....
The following 2 users liked this post by Tech II:
hairydog03 (02-17-2018), Soft Ride (02-17-2018)
Old 02-17-2018, 02:37 PM
  #7  
Junior Member
Thread Starter
 
hairydog03's Avatar
 
Join Date: Feb 2018
Posts: 6
Received 0 Likes on 0 Posts
hairydog03 is on a distinguished road
Default

Originally Posted by Tech II
With a Tech II scanner, you should be able to diagnose both problems in 0.5-1.0 hours, if you know what you are doing....

One thing I would try is swapping the RAP relay with another to see if this fixes the problem....correction, it is the battery saver relay, not the rap relay, that powers the radio....
Do you have a picture or a diagram of these relays? I looked in the owners manual and do not see any fuses labeled with those words.
Old 02-17-2018, 10:42 PM
  #8  
Senior Member

True Car Nut
 
Tech II's Avatar
 
Join Date: Feb 2014
Location: Worcester, Ma.
Posts: 2,878
Received 1,084 Likes on 832 Posts
Tech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond repute
Default

I am not sure where they are located, but you are looking for relays, not fuses...
Old 02-17-2018, 11:01 PM
  #9  
Senior Member

True Car Nut
 
Tech II's Avatar
 
Join Date: Feb 2014
Location: Worcester, Ma.
Posts: 2,878
Received 1,084 Likes on 832 Posts
Tech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond reputeTech II has a reputation beyond repute
Default

It says relays located in the I/P fuse block.

The following users liked this post:
Soft Ride (02-18-2018)
Old 02-18-2018, 12:01 AM
  #10  
Senior Member


True Car Nut
 
Soft Ride's Avatar
 
Join Date: Jan 2012
Location: BC Canada
Posts: 4,905
Received 586 Likes on 515 Posts
Soft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud ofSoft Ride has much to be proud of
Default

TechII is that diagram from All Data or? Are there any loose Relays around/ behind IP?
The owners manual does not seem to indicate a Battery saver relay, unfortunately.
Here is the download pdf owners manual from GM, if that helps....
https://my.buick.com/content/dam/gmo...gal_owners.pdf
See index under fuses, it has a click on directly to page 10-39, 10-40, 10-43...
I would be tempted to call a GM dealer & ask them if they know if that regal has a battery saver relay & it'* location,or if they have any info on it?
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!

Last edited by Soft Ride; 02-18-2018 at 12:04 AM.


Quick Reply: Drivers window works half the time and radio won't turn off



All times are GMT -4. The time now is 04:22 AM.