Buick When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.

02 Injector clip removal (green clip)

Thread Tools
 
Search this Thread
 
Old 04-22-2012, 02:30 PM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
kanecats's Avatar
 
Join Date: Apr 2012
Location: NJ
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
kanecats is on a distinguished road
Question 02 Injector clip removal (green clip)

I am a female new to wrenching! Could someone please tell me how to take the electrical connectors off of the injectors so I can move on to Plenum removal? Also if you could tell me how to take the cables off the throttle body...that would also be helpful! Thanks in advance!!
Old 04-22-2012, 02:38 PM
  #2  
Senior Member
True Car Nut
 
MouSe's Avatar
 
Join Date: Oct 2009
Location: Atlanta
Posts: 5,988
Received 4 Likes on 4 Posts
MouSe is on a distinguished road
Default

We just did this to my car. A buddy and I used needle nose pliers to remove the clips that hold on the connectors. Also, removing the TB cable'* isn't needed. Remove the TB from the UIM and replace the TB gasket (it'* like $5).
Old 04-22-2012, 03:18 PM
  #3  
Member
Posts like a V-Tak
Thread Starter
 
kanecats's Avatar
 
Join Date: Apr 2012
Location: NJ
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
kanecats is on a distinguished road
Default

Originally Posted by MouSe
We just did this to my car. A buddy and I used needle nose pliers to remove the clips that hold on the connectors. Also, removing the TB cable'* isn't needed. Remove the TB from the UIM and replace the TB gasket (it'* like $5).
Thanks mouSe...sorry to be so thick headed but the green tab seems like it would release the connector somehow. I am just afraid to crunch the whole thing and be screwed. I have looked everywhere for a video...and once I figure this out, plan to post one. If you have more specifics I would be grateful!

Re the throttle body...I plan to remove it and give it a thorough cleaning, since the tack keeps hunting and the throttle body linkage seems to stick a bit when I pull the throttle. I think it would be a real pain on the car.
Old 04-22-2012, 06:18 PM
  #4  
Senior Member
True Car Nut
 
MouSe's Avatar
 
Join Date: Oct 2009
Location: Atlanta
Posts: 5,988
Received 4 Likes on 4 Posts
MouSe is on a distinguished road
Default

I told Yutzy to come in here since he'* the one who removed the clips/connectors when we did my car. I just held them still so I couldn't really see what he was going after. I know it was a metal clip though.

On the TB I just removed it out of the way, then cleaned it from the both sides. Didn't remove the linkage at all.
Old 04-22-2012, 06:46 PM
  #5  
Artist
True Car Nut
 
yutzybrian's Avatar
 
Join Date: Jul 2009
Location: USA
Posts: 5,283
Received 49 Likes on 36 Posts
yutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to beholdyutzybrian is a splendid one to behold
Default

The clips are a real pain. I used the needle nose pliers to get the one side loose and then the other side came with it after that. Just get on the back of the clip where it bends down 90 degrees and lift that up and off.
Old 05-03-2012, 11:34 AM
  #6  
Member
Posts like a V-Tak
Thread Starter
 
kanecats's Avatar
 
Join Date: Apr 2012
Location: NJ
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
kanecats is on a distinguished road
Default

With a small mirror I was able to see the underside mechanics of how the clip works! If you pop up the green tab about a quarter inch, it frees up the clip for removal. Once the green clip is popped up, simply take your finger and place it on the under side of the clip and gently pull up. With my small fingers I could feel the clip and move it to the side, but for larger hands if you place gentle pressure up, it pops right off. Thanks for everyone'* responses!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nighthwk12
Mechanical
0
02-19-2011 07:10 PM
trixster68
1992-1999
2
06-03-2010 08:51 PM
willwren
Your Ride: GM Pictures & Videos
24
02-25-2007 10:46 PM
Bonneville92V688
Detailing & Appearance
6
05-03-2006 04:46 PM



Quick Reply: 02 Injector clip removal (green clip)



All times are GMT -4. The time now is 06:24 AM.