remove evap solonoid 2002 buick
#1
Senior Member
Posts like a 4 Banger
Thread Starter
remove evap solonoid 2002 buick
It seems that the simplest things sometimes cause the most problems. I am trying to change front valve cover gasket. In order to remove cover I have to move evap solonoid out of the way. It seem to just slip on to a flat metal bracket. however I have not been able to just slip it off. I'm afraid to force it since it is made of plastic. what am I missing? Should I just jerk it off? I don't see any retaining clips. Thanks for any help.
#2
Senior Member
If you look closely at the bracket, there is a metal clip there, in the center....bend it outward with a small screw driver at the bottom of the bracket and then the solenoid comes off easy......bend it back inward before reinstalling the solenoid....
The following users liked this post:
WilliamE (05-27-2014)
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Thanks for the help. It came right off just as you said. I knew it couldn't be to complicated. I just didn,t want to break it while trying to get it off.
Thread
Thread Starter
Forum
Replies
Last Post