91 Buick Park Avenue Compressor bypass issue
#1
Junior Member
Thread Starter
Join Date: May 2018
Location: Seattle, WA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
91 Buick Park Avenue Compressor bypass issue
I just finished taking out the AC compressor and installing a bypass pulley since my AC hasn't worked in years and the pulley on the compressor was throwing metal shavings in bogging down the engine. After I got done install in I went to start the car and it just clicked. Didn't even turn over. The wires that went to the compressor are now not plugged into anything. This consisted of 3 different sets of wires. I'm guessing that has to do with the issue but not sure. Any advice would be appreciated Thank you.
#2
Senior Member
True Car Nut
Check the major ground connectors, especially right there under the ICM.
Aside from that, I would start checking for power at the starter, etc.
Unless the bypass pulley is seized up...
Aside from that, I would start checking for power at the starter, etc.
Unless the bypass pulley is seized up...
#3
Senior Member
True Car Nut
Thread
Thread Starter
Forum
Replies
Last Post
Sourgirl718
Pontiac
9
02-21-2019 11:42 PM
tlsheff
Performance, Brainstorming & Tuning
14
05-27-2009 01:08 PM