Jack points?
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: Ocala Fl
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Jack points?
Does anyone know where the official jack points are on a 05 Bonny? Are there any down the center of the car that a floor jack can use? It appears there are 3 on the sides of the car best suited for the factory jack.
#2
Administratus Emeritus
Certified Car Nut
Only two listed in the manual front and back as I remember. I personally use the bottom of the control arm in the front and coil spring mount in the back. There are many places that can take the stress, it'* a judgment call and avoiding the body pan is a given.
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Like Venom mentions... there are alternatives. Depending on what you need to jack it up for would change where I would suggest.
In the front, the subframe is a good location. The aluminum control arms, I might be leary about, sure they would probably handle it fine though. In the rear, there is the support across the tunnel that is very solid.
In the front, the subframe is a good location. The aluminum control arms, I might be leary about, sure they would probably handle it fine though. In the rear, there is the support across the tunnel that is very solid.
#4
Senior Member
True Car Nut
Join Date: Mar 2009
Location: Fort crack homie
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
i did it few times and used the ones John mentioned, they are also mentioned somewhere in the manual. if you cant find it i can post some pics
Thread
Thread Starter
Forum
Replies
Last Post
obiwanshinobi
1992-1999
4
10-13-2009 08:01 PM