where to get power for aeroforce?
#1
Senior Member
True Car Nut
Thread Starter
where to get power for aeroforce?
Where should I tap into power for the aeroforce gauge? I plan to install in the driver side right hand side lower vent.
#4
Senior Member
True Car Nut
Thread Starter
Originally Posted by dbeast420
Use an ad-a-fuse and run it from the fuse block radio fuse
#5
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hans
Originally Posted by dbeast420
Use an ad-a-fuse and run it from the fuse block radio fuse
#6
Senior Member
Posts like a Northstar
Join Date: Mar 2007
Location: Maumee, OH
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Pull out the radio. On the left side of the cavity you will see the ignition harness. Tap into orange or brown for an accessory line (12+ when the vehicle is on).
#7
Originally Posted by dbeast420
Use an ad-a-fuse and run it from the fuse block radio fuse
I'd still vote something connected to the radio.
#9
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
I used the power wire from the HUD switch, it was the closest remote power wire I found.
Guys Please remember the 00+ Bonnes are NOTHING like the earlier Generations...
the HUD wire your looking for is a Pink wire....i ran my Dual Aeroforces off the Start 1 Relay in the Rear Fuse Block....the Start 1 relay feeds the cluster, and the HUD switch for Power...its a PINK wire that runs out of the rear fuse block and then gets distributed to the various controls in the car
Thread
Thread Starter
Forum
Replies
Last Post
options13
Everything Electrical & Electronic
11
08-13-2006 01:42 PM