how to remove interior door panels
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2007
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
how to remove interior door panels
hey, i have a 96 b-ville SE and i am going crazy trying to remove the interior door panels. the reason i want to remove them is so that i can install some aftermarket speakers that i don't quite have yet. can someone PLEASE give me detailed instructions on how to do it? if you've done it yourself that would be best, but if you know how just reply to this post or toss me a PM or whatever. i've gotten as far as getting all the plastic clips out, but i just don't want to ruin anything. ANY help would be greatly appreciated!
#2
Front: http://www.bonnevilleclub.com/forum/...e=article&k=40
Rear: http://www.bonnevilleclub.com/forum/...e=article&k=41
Or, if you like pictures... http://trialsnuts.com/doorpanel.pdf (hopefully Stand doesn't kill me, that is beta material there!)
During the final part of removal, be sure to remove the door panel UP and not OUT, you don't want to damage the trim channel at the top of the panel. Good luck!
edit - be VERY careful with the courtesy light lenses, they LOVE to break from being so brittle.
Rear: http://www.bonnevilleclub.com/forum/...e=article&k=41
Or, if you like pictures... http://trialsnuts.com/doorpanel.pdf (hopefully Stand doesn't kill me, that is beta material there!)
During the final part of removal, be sure to remove the door panel UP and not OUT, you don't want to damage the trim channel at the top of the panel. Good luck!
edit - be VERY careful with the courtesy light lenses, they LOVE to break from being so brittle.
Thread
Thread Starter
Forum
Replies
Last Post
ibanezcollector
Audio (and aftermarket electronics)
6
02-05-2005 06:48 PM
Berlinetta92
Your Ride: GM Pictures & Videos
10
09-07-2004 10:47 AM