Running Power Wire
2 Attachment(s)
where would i go from here? what would i take out next? a whole lot of stuff in the way and im worried about the air bag
Attachment 65398 Attachment 65399+ |
back up,
you are starting where? and ending where? For all the wire I have ran, I never went that route. |
from the battery, through the firewall...........
or does it need to be lower im just working this out as i may be adding an amplifier |
i would find your firewall hole before you start taking stuff apart... i did everything power on the drivers side
|
http://www.bonnevilleclub.com/forum/...=firewall+wire
you should be able to see into the area where pat drilled ( I would have pics too, but the site they are hosted on is down for maint. ) by just taking hte pass footwell cover off and looking up. you can take that engine harness piece offto see what is is behind there. |
yeah Corvette and i id this on mine last weekend its take like 20-30min easy
|
yea i ran my power on the driver side. way easier a clean looking
|
Run it down the drivers side, and pass through the firewall where the main harness goes through.
|
Originally Posted by LakevilleSSEi
Run it down the drivers side, and pass through the firewall where the main harness goes through.
|
Originally Posted by 1993 SLE
Originally Posted by LakevilleSSEi
Run it down the drivers side, and pass through the firewall where the main harness goes through.
|
Oops.....I mean't passenger side, my bad.
Pat you know I didn't run my wiring that way because I was on the phonew with you when I ran the wiring LOL |
Go lower and come in from the main wiring harness. The wire tends to go under the carpeting and padding so you need to pull up that corner to get it.
Have fun contortioning yourself into that area. |
Originally Posted by 1993 SLE
Originally Posted by LakevilleSSEi
Run it down the drivers side, and pass through the firewall where the main harness goes through.
|
Originally Posted by GAMEOVER
Originally Posted by 1993 SLE
Originally Posted by LakevilleSSEi
Run it down the drivers side, and pass through the firewall where the main harness goes through.
|
All times are GMT -4. The time now is 03:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands