remote start wiring diagram 92 bonneville
12-14-2005, 08:31 AM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
remote start wiring diagram 92 bonneville
anyone know a good site where i can go to look at wiring diagram to hook up a remote start, i have one already installed but recently when i start it the starter doesn't disengage, i have a rs7k2 remote start if that matters any.
12-14-2005, 10:06 AM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Do you have a manufacturer name like Viper or Clifford?
Does the starter disengage normally if you start the car with out the remote starter? If so I would suspect the remote starter unit as defective.
Does the starter disengage normally if you start the car with out the remote starter? If so I would suspect the remote starter unit as defective.
12-14-2005, 10:58 AM
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
omega rs7ks and yes the starter disengages when i dont use the remote start, i found a site a while ago that had the wiring diagram for it but now i cant find it.
12-14-2005, 11:30 AM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
The start feature is usually controlled by the brain unit of the remote and it sounds like it either can't see the tachometer signal or there is a deeper issue in the circuitry.
Although I was under the impression that it was supposed to run the starter for a moment or two, then check the signal. Retry if a no start occurred.
Although I was under the impression that it was supposed to run the starter for a moment or two, then check the signal. Retry if a no start occurred.
12-14-2005, 04:19 PM
#5
Senior Member
True Car Nut
Originally Posted by BillBoost37
The start feature is usually controlled by the brain unit of the remote and it sounds like it either can't see the tachometer signal or there is a deeper issue in the circuitry.
Although I was under the impression that it was supposed to run the starter for a moment or two, then check the signal. Retry if a no start occurred.
Although I was under the impression that it was supposed to run the starter for a moment or two, then check the signal. Retry if a no start occurred.
12-16-2005, 12:40 AM
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
it started acting different when it got cold out, the starter will disengage after about 5 seconds and then its fine, i just dont want screw up the starter. and that was the site where i got before just couldnt remember it
12-22-2005, 12:07 AM
#10
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by furdan
Hi I can’t find my wires for bulldog remote starter, like domelight, and factory alarm disarm.
I have a Bonneville '92SE.
Any help appreciated.
I have a Bonneville '92SE.
Any help appreciated.