Question about Sub Sonic Filter
09-24-2010, 10:20 AM
#12
Senior Member
True Car Nut
Join Date: Jun 2007
Location: New Lenox, IL
Posts: 2,478
Likes: 0
Received 0 Likes
on
0 Posts
Its always beneficial to know why something works. I learned something his post which I didn't learn from the others before his. Knowing why something works is infinitely more valuable than just knowing it works. Plus, it can be a great resource for other people who see it in the future.
09-26-2010, 06:35 PM
#14
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: Hibbing MN
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Close, but it'* the opposite. It controls/limits how low the sub or subs can play. What kind of box are your subs in and if ported, what is it tuned to?
Why would you go against your own advice on not setting the SSF below box tuning? From what I understand, you want to set the SSF about 10Hz below tuning.....but how the hell do you do that???? So what I do is set it by ear and by eye.....I start with the filter all the way turned down to the lowest setting and play a song that I know hits lower than my tuning frequency. With the SSF turned to it'* lowest setting you'll see that your sub moves alot after the bass hits and looks uncontrolled and looks like unnecessary movement since you can't hear any output at times.......you'll see what i'm talking about if you pay attention. So I just turn the SSF up until the cone movement is controlled and tight.
In a sealed box you can turn the SSF off. The point of the SSF is to prevent over excursion of your subs in a ported box since the box itself doesn't help at all with that. In a sealed box the cone movement is much more controlled which is one of the main reasons for added power handling capabilities. So yeah, no SSF needed when your subs are in a sealed box.
Why would you go against your own advice on not setting the SSF below box tuning? From what I understand, you want to set the SSF about 10Hz below tuning.....but how the hell do you do that???? So what I do is set it by ear and by eye.....I start with the filter all the way turned down to the lowest setting and play a song that I know hits lower than my tuning frequency. With the SSF turned to it'* lowest setting you'll see that your sub moves alot after the bass hits and looks uncontrolled and looks like unnecessary movement since you can't hear any output at times.......you'll see what i'm talking about if you pay attention. So I just turn the SSF up until the cone movement is controlled and tight.
In a sealed box you can turn the SSF off. The point of the SSF is to prevent over excursion of your subs in a ported box since the box itself doesn't help at all with that. In a sealed box the cone movement is much more controlled which is one of the main reasons for added power handling capabilities. So yeah, no SSF needed when your subs are in a sealed box.
09-26-2010, 08:56 PM
#15
Senior Member
Posts like a Turbo
Join Date: Jul 2010
Location: Sacramento, CA.
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Just had to bust your balls a little bit, I know you know what'* up
Thread
Thread Starter
Forum
Replies
Last Post
raptor660
Audio (and aftermarket electronics)
18
07-08-2011 07:29 PM