Angel's LED Ring
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
Angel'* LED Ring
OK, so i false connected everything and its gonna work with th button on the side of my GA Shifter, now to wire it...my two problems (that I currently know of...) are going to be the length of wire (i have that covered), and going through the fire wall...
so my question is where is the best place to go through from the engine compartment to the shifter
thanks in advance
~BOOZE
so my question is where is the best place to go through from the engine compartment to the shifter
thanks in advance
~BOOZE
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
mmk, not working... :?
i can't pinpoint where its going, and i found a place on the passenger side, behind the glove box behind the air bag but I cant get to it due to the airbag and the AC vents, the ac is mounted backwards and i dont think i could move it even when i unbolt it, and i just plain cant do the air bag...i can see where i want to go but i cant feed it through, and i went under the hood on the passenger side and i can see where thats going but the wires go into the goo looking stuff, thats is hardened, and im not sure what to do anymore...
i can't pinpoint where its going, and i found a place on the passenger side, behind the glove box behind the air bag but I cant get to it due to the airbag and the AC vents, the ac is mounted backwards and i dont think i could move it even when i unbolt it, and i just plain cant do the air bag...i can see where i want to go but i cant feed it through, and i went under the hood on the passenger side and i can see where thats going but the wires go into the goo looking stuff, thats is hardened, and im not sure what to do anymore...
#5
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I did the driver'* side as well. It'* easier to find the hole when you're looking under the dash on the driver'* side up in that corner. Without looking in the car as I type, there'* a cable with a big rubber grommet that pulls out, and you have a nice big hole to work with.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
well my problem on the drivers side was i couldn't find that spot under the dash, i can see it under the hood and i poked around with screw driver and couldn't see it, and i felt around too, i'll have another go tomorrow...
#7
Senior Member
True Car Nut
Join Date: Feb 2006
Location: Melrose
Posts: 4,596
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 93-SSE
well my problem on the drivers side was i couldn't find that spot under the dash, i can see it under the hood and i poked around with screw driver and couldn't see it, and i felt around too, i'll have another go tomorrow...
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2006
Location: Virginia
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
yeah i was thinking about something like that before but i couldn't find the hole to do that with, search begins again in a few hours
thanks guys, i'll be posting again if i get stuck
thanks guys, i'll be posting again if i get stuck
Thread
Thread Starter
Forum
Replies
Last Post
Merlin 91/97
Audio (and aftermarket electronics)
5
11-10-2004 06:40 PM