hud
06-29-2009, 11:07 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2009
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
hud
i have a 98 with out the hud. is it hard to add the hud in this car cause i drove a vette with one and loved it any input on this would be helpful thanks
06-29-2009, 11:25 PM
#3
From Bill in a dif post:
Let'* stop this silliness too... 
All here that have done the swap at least once please smile
<~~~
Windshield image does not suffer like the guy who used to run this forum would tell everyone. He never tried it, never saw one, and IMHO he was quite full of brown, smelly stuff.
Is it the same perfect image, not quite. A person that isn't going from one with to one w/o will not be able to notice that it'* not perfect. And if adding to a W body, it'* the same.
You'll need the dash. That makes it easy. Swap the wiring harness from yours then add in the hud wires, run the cable for the adjuster and install into your car. Presto, all set.
All here that have done the swap at least once please smile
<~~~
Windshield image does not suffer like the guy who used to run this forum would tell everyone. He never tried it, never saw one, and IMHO he was quite full of brown, smelly stuff.
Is it the same perfect image, not quite. A person that isn't going from one with to one w/o will not be able to notice that it'* not perfect. And if adding to a W body, it'* the same.
You'll need the dash. That makes it easy. Swap the wiring harness from yours then add in the hud wires, run the cable for the adjuster and install into your car. Presto, all set.
06-30-2009, 06:41 AM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Thanks Todd...lol there was a little controversy on how hard it was..
the dash comes out with about 10 bolts and one main electrical connector and two small ones. It'* a one day kinda job.
the dash comes out with about 10 bolts and one main electrical connector and two small ones. It'* a one day kinda job.
Thread
Thread Starter
Forum
Replies
Last Post