Fabrication help...
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Dec 2005
Location: Fresno, California
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Fabrication help...
http://www.thegadgetlocker.com/produ...oducts_id/2288
The above link is a toy I bought my wife for Christmas and I was wondering if anybody out there might be able to fabricate something for me to mount this in the SSEi. I can get you exact measurements to the only accessible mounting options which are the strap brackets on each side. I have seen an IPod, or something, mount on this board somewhere and I was wondering if that could be used along with some fabrication. Any help would be greatly appreciated. Thanks,
Mac
The above link is a toy I bought my wife for Christmas and I was wondering if anybody out there might be able to fabricate something for me to mount this in the SSEi. I can get you exact measurements to the only accessible mounting options which are the strap brackets on each side. I have seen an IPod, or something, mount on this board somewhere and I was wondering if that could be used along with some fabrication. Any help would be greatly appreciated. Thanks,
Mac
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Mac..there'* a way to fabricate anything. All it really takes is a little skill, a lot of time and plenty of patience with things looking ugly.
#3
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Dec 2005
Location: Fresno, California
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Bill...that I definetly understand but I do not have any of the tools needed or, really, the skill set needed to do any fabricating and that is why I asked the question. If I could give someone the measurements and maybe a rough drawing or what I was talking about could anyone here provide the tools and skills to make it happen? I have seen alot of amazing stuff done here so I know the skill set if present but I don't know how hard it would be for someone to work with me to make it happen! Thanks,
Mac
Mac
Thread
Thread Starter
Forum
Replies
Last Post
billythekid
Performance, Brainstorming & Tuning
17
03-30-2011 03:12 PM