trunk
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2006
Location: Windsor, Ontario, CANADA EH!
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
trunk
Not sure if I am posting in the right place (i thought this or detailing). I recently bought some sort of dynamat off of ebay and I want to install it myself. Has anyone done this? If so, do you have any advice to make the process go easier? also it would be good to know technique, problem areas, preperation, etc. I just dont want to do all of that work and have it come off in a few months. I have a '96 SSE and 50 square feet of mat. here is a link to my setup but I can say I have loud speakers all the way around.
http://www.bonnevilleclub.com/forum/...ic.php?t=55608
ty in advance.
http://www.bonnevilleclub.com/forum/...ic.php?t=55608
ty in advance.
#2
give yourself a whole weekend... and make its its nice and hot out.. so the tar actually melts and sticks...
http://www.bonnevilleclub.com/forum/...ight=peel+seal
http://www.bonnevilleclub.com/forum/...ight=peel+seal
#3
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
give yourself a whole weekend... and make its its nice and hot out.. so the tar actually melts and sticks...
http://www.bonnevilleclub.com/forum/...ight=peel+seal
http://www.bonnevilleclub.com/forum/...ight=peel+seal
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2006
Location: Windsor, Ontario, CANADA EH!
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Did you use a roller? I was going to buy one but I thought I could rig somethign up. As of yet I am only doing the trunk, you got pretty serious there. Has anyone done multiple layers? I was planning on doing the trunk with at least 2 layers since that is where all of my rattles are. I just hope that once i get the first layer down, the second one sticks to the first. Guess I will find out next weekend. Glad to hear the smell went away because I was worried about that aswell. TY for the info!
here is a link for the stuff I am using (ebay)
http://www.edesignaudio.com/category...e=damp&cur=USD
My stuff is the v1 but I may get a can of the v3 later on if this stuf doesn't get the job done. I'll let you all know how it worked out and if I recommend the stuff.
here is a link for the stuff I am using (ebay)
http://www.edesignaudio.com/category...e=damp&cur=USD
My stuff is the v1 but I may get a can of the v3 later on if this stuf doesn't get the job done. I'll let you all know how it worked out and if I recommend the stuff.
Thread
Thread Starter
Forum
Replies
Last Post
jarheadbobandmax
Detailing & Appearance
0
03-29-2011 06:47 AM
traverb1213
1992-1999
2
10-15-2007 10:50 AM