Now need help on Amp ratings for these speakers...
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Now need help on Amp ratings for these speakers...
I think I will go for some new Pioneer speakers. Looking at the 4-way 6x9, and the 4x6 for the front (that is stock size, right?). Here are the ratings...(4 OHM Speakers)
6x9 - 350w peak/80 RMS
4x6 - 120w peak/20 RMS
Are those decent ratings? Or should I look at a better model? Now what type of power should I look for on a 4 channel amp? I Saw a PPi on ebay for 150 and had 40wx4 RMS at 4 Ohm. That seems like to much for the 4x6 and too less for the 6x9. I want to be able to turn them up without blowing or disorting anything
6x9 - 350w peak/80 RMS
4x6 - 120w peak/20 RMS
Are those decent ratings? Or should I look at a better model? Now what type of power should I look for on a 4 channel amp? I Saw a PPi on ebay for 150 and had 40wx4 RMS at 4 Ohm. That seems like to much for the 4x6 and too less for the 6x9. I want to be able to turn them up without blowing or disorting anything
#3
Senior Member
Posts like a Turbo
Join Date: Dec 2003
Location: INDIANA
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
just make sure you set your cross overs right and you will be able to turn them up. if you have the 4x6'* getting any bass with a amp you can pretty much tell them good bye because they will blow pretty quickly
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Audio (and aftermarket electronics)
2
05-03-2008 02:15 AM