dynamat placement
 

alright ive got two wedge packs and a door kit. i would like to put some on the trunk lid so that i can cover it with a trunk lid liner once i find one. what needs to remain uncovered for this? (ie where should the dynamat NOT go). also in the door, where should it go and not go?

dynamat needs to go everywhere. i even went as far as to sound deaden the staples on the back of my rear seat. remove your trunk lid and sound deaden the bars that go up into it, remove your trunk lock and latch and sound deaden under it, and cover your entire trunk lid in sound deadening then close it, take a razor and cut off the excess in the gap from the outside of the car.

well id like to do this in a clean way, if i can help it i just want it to go where it wil be covered by carpet. partially so that if i ever try to resell it the old people who own it wont have to see shiny blindness everytime they open the trunk.

Darn old people. :x

lol damn the old people indeed!

but still any advice or just a picture of the dynamat on the trunk lidwhere i can still put the carpet on?

do you have a trunk lid insulator?? if you dont then just follow the frame of hte trunk (where the arms are, and where the lid bulges out) and stay inside there, and the lid insulator will cover that

https://www.pbase.com/aviator327/image/34091647.jpg

here is a general idea

that pic is helpful becuase i can see the clips, but im pretty sure a 93 is different then a 97.

yes it is, but it is realllllly clost to being the same, just dont go outside the where the weatherstripping would come incontact with the lid

Attachment 77581

and then i poked holes in the tar, and put the liner back on....you cant even tell in there...at all...in the whole trunk.....its all covered