Custom Sub Box in the GXP
#101
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
u got more space than i do with my 8'*. lol! good thing u went sealed, JL has a part in the owners manual for the 13TW'* that says in bold print NOT RECOMMENDED FOR PORTED ENCLOSURES, lol. prolly do to the short voicecoil. made for punchy bass not deep, move alot of air bass.
#103
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
use the specs for the 10w7 just to get it in the ballpark, just showing u what adjustments to have set at 0. and approx on the others... make sure to not use any bassboost. and if possible use a gasket between the sub and box to make a 100% seal, u got to maintain 100% control of the movement of the cone.. the 13TW5'* voicecoil is less than a inch tall, unlike most conventional subs that have a voicecoil of 3 or 4" tall.
#104
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2009
Location: Fort crack homie
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
when you say when its set at 0 you mean the subwoofer level in the HU right?
bassboost is off, just out of curiousity why is it bad to turn it on?
and the seal is there between the sub and the box
bassboost is off, just out of curiousity why is it bad to turn it on?
and the seal is there between the sub and the box
#105
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
i mean the bassboost on the amp... that diagram i showed u shows u how to set most of it...ur supposed to set all eq curves flat, but thats unrealistic. I got a descent curve on my headunit, and my setting on my amp are set modestly.