Autopia foglamp installation,
 

well, sort of........

Here are some pics I took of the "Installation" ask questions if needed cause I'm not typing under every photo for an explanation :lol:

Attachment 49783
Attachment 49784
Attachment 49785
Attachment 49786
Attachment 49787
Attachment 49788
Attachment 49789
Attachment 49790
Attachment 49791
Attachment 49792

I actaully mounted the lamps onto the peice where the stock bracket went, insted of using any type of bracket (although I did invest in Joist Hangers) my Co-worker just suggested using the exsiting bolts from the lamps themselves.

In one of the photos you can see two little holes right under the stock mounting holes use for the OEM brackets, those little holes were created to bolt right up from the screws that were on the Actual foglamp backing itself.

I however became very uneasy when he devised this plan........ I didn't know if they would hold up, the backing is pretty heavly alum.

I took several photos of the halo's but they didn't turn out too good :cry: you can see what they look like tho on eBay,