advice and opinions
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2004
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
advice and opinions
well ive been searching around talking to different retailers about which amp would be good enuff and cheap enuff to power my jlaudio W3v2 12"* i want bass and i want it to be loud ... most have offered there opinion in buying the jl audio 500/1 well i really want that amp but its going brand new for about 400 and up and i dont wanna pay 400 dollars for a 500 watt amp and now i dont know the direction i should go as which amp will give me the best sound for the buck ... PLease help
#2
Senior Member
Posts like a Supercharger
Join Date: Oct 2004
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Re: advice and opinions
Originally Posted by silverbonnie
well ive been searching around talking to different retailers about which amp would be good enuff and cheap enuff to power my jlaudio W3v2 12"* i want bass and i want it to be loud ... most have offered there opinion in buying the jl audio 500/1 well i really want that amp but its going brand new for about 400 and up and i dont wanna pay 400 dollars for a 500 watt amp and now i dont know the direction i should go as which amp will give me the best sound for the buck ... PLease help
Hifonics ( will do rated power)
MA Audio (slightly over rated)
Profile California Series Only (will do rated power cleanly)
Memphis (little more expensive)
Earthquake (powerhouse series will do more than rated)
Phoenix Gold (slightly over rated)
JBL (will do rated power)
MTX (older models)
just to name a few.. watch out for mass marketing.. Even the ones above.. if you need a full break down let me know
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2004
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
i think ill need the full breakdown knowing me ill go to the store and buy one of those badboys not knowing which one was good lol anywho basically i dont wanna pay too much but i need to have a good amp cuz id like it to be loud thanks for the help and any more help you can offer
#4
Senior Member
Posts like a Turbo
Join Date: Feb 2005
Location: Buffalo, NY
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by silverbonnie
i think ill need the full breakdown knowing me ill go to the store and buy one of those badboys not knowing which one was good lol anywho basically i dont wanna pay too much but i need to have a good amp cuz id like it to be loud thanks for the help and any more help you can offer
how much power do you want?
i think a phoenix gold xenon x600.1 is a nice option for you. i own the x1200.1
there are tons of options out there, but lots of gimmicks
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2004
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
well basically i want enuff power to hear sum nice boomin ... not sure if i wanna rattle house windows and such but close too it how much do 1 of those cost?
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2004
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
well heres sum info directly from the official jlaudio website
Nominal Diameter: 12 inches (300 mm)
Continuous Power Handling: 300 Watts
Voice Coil: 2.25" diameter, 4-layer, Kapton former
Available Configurations: Dual 2 ohm, Dual 4 ohm or Dual 6 ohm
Xmax (one-way, linear): 0.46"-0.51" (11.7-13.0 mm) depending on specific model
Sealed Enclosure Range: 1.00-1.50 cu.ft. (28.3-42.0 liters)
Ported Enclosure Range: 2.00-3.00 cu.ft. (57.0-85.0 liters)
VRC™ Technology: YES
Elevated Frame Technology: YES
heres also a pic i have from there site with the rms ratings
Nominal Diameter: 12 inches (300 mm)
Continuous Power Handling: 300 Watts
Voice Coil: 2.25" diameter, 4-layer, Kapton former
Available Configurations: Dual 2 ohm, Dual 4 ohm or Dual 6 ohm
Xmax (one-way, linear): 0.46"-0.51" (11.7-13.0 mm) depending on specific model
Sealed Enclosure Range: 1.00-1.50 cu.ft. (28.3-42.0 liters)
Ported Enclosure Range: 2.00-3.00 cu.ft. (57.0-85.0 liters)
VRC™ Technology: YES
Elevated Frame Technology: YES
heres also a pic i have from there site with the rms ratings
#10
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by silverbonnie
i do believe i have the 4ohm it says (D4) so im assuming thats what it is .... and how many watts is the RF amp you own bro? and its a monoblock i assume?
Thread
Thread Starter
Forum
Replies
Last Post