Adding Aux-In to my Delco Radio
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2009
Location: Viersen , Germany
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Adding Aux-In to my Delco Radio
Hi!
I some questions about my 16137692 Delco Radio
it'* this one
I'd like to have an aux-in , but currently not really sure how to do it.
The tapedeck has some problems, so if I use my 3.5mm jack cassette adapter, i'll only get 3/4 stereo or so.
Since I wouldn't need the tapedeck, I'd choose to disconnect the power supply to the deck and use it'* L/R +/- cables for my 3.5mm setup.
Today I pulled the radio and found something irritating.
There is a free port on the backside of the radio, numbers 11+
On top of the radio, it says that these are aux-ports. Is that so?
And another one says "calling" or sth....
Could I use this port for my plans`? Would be really nice if I don't have to disassemble the whole radio
thanks in advance
alex
ps: if someone has a pinout for this radio, i'd be very thankful ^^ haven't found anything :(
I some questions about my 16137692 Delco Radio
it'* this one
I'd like to have an aux-in , but currently not really sure how to do it.
The tapedeck has some problems, so if I use my 3.5mm jack cassette adapter, i'll only get 3/4 stereo or so.
Since I wouldn't need the tapedeck, I'd choose to disconnect the power supply to the deck and use it'* L/R +/- cables for my 3.5mm setup.
Today I pulled the radio and found something irritating.
There is a free port on the backside of the radio, numbers 11+
On top of the radio, it says that these are aux-ports. Is that so?
And another one says "calling" or sth....
Could I use this port for my plans`? Would be really nice if I don't have to disassemble the whole radio
thanks in advance
alex
ps: if someone has a pinout for this radio, i'd be very thankful ^^ haven't found anything :(
Thread
Thread Starter
Forum
Replies
Last Post
AandF924
Audio (and aftermarket electronics)
13
02-07-2009 03:06 PM
GMCSonoma
Everything Electrical & Electronic
35
03-27-2007 09:25 PM
glanghus
Everything Electrical & Electronic
2
06-04-2004 11:26 PM