led lighting
#1
Senior Member
Posts like a Camaro
Thread Starter
led lighting
okay so i just bought some leds to do this i was mainly wanting to know what is the best way to to this
im thinking
splice into brakelight wiring and the run a switched ground (so it can be shut off while top is up)? would this work
im thinking
splice into brakelight wiring and the run a switched ground (so it can be shut off while top is up)? would this work
#3
Senior Member
Posts like a Camaro
Thread Starter
lol i see why. i copied and pasted this from another forum but on that one i let the title explain it all
im wanting to do an led brakelight on my roll bar
im wanting to do an led brakelight on my roll bar
#7
DINOSAURUS BOOSTUS
Expert Gearhead
I'm interested in why you guys say swtich power. Ground is usually the better item to switch in an auto. The reason behind this is wherever you run a ground through the body etc, if it rubs and grounds out. Then your items stays on and you locate the issue. If a power wire rubs bare, you pop fuses and in this case would be left w/o brake lights entirely if not fused seperately.
#8
Senior Member
Posts like a Camaro
Thread Starter
okay wasnt sure thanks
and what would be the best way to find out which wire to splice?
ROBERT GET OVER HERE WITH YOUR DIAGRAMS AND CRAP LOL
and what would be the best way to find out which wire to splice?
ROBERT GET OVER HERE WITH YOUR DIAGRAMS AND CRAP LOL
#9
Senior Member
Posts like a Camaro
Thread Starter
hmm so im at a loss now you say swich ground but all otheres say power?
i will just probably go with the most prevalent answer once the lights get here
i will just probably go with the most prevalent answer once the lights get here