2001 ssei master door & window control
#1
2001 ssei master door & window control
2001 SSEI
Drivers door works fine, other 3 doors, no window or lock control. took out master control in drivers door & connections seem fine.
Any help will be appreciated.
Tx
tom
Drivers door works fine, other 3 doors, no window or lock control. took out master control in drivers door & connections seem fine.
Any help will be appreciated.
Tx
tom
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like the class 2 communication to the other door controls is suspect. How does the boot inbetween the door jamb look on the drivers side?
YOu really need a scan tool to narrow it down?
YOu really need a scan tool to narrow it down?
#4
wire boot @ drivers door looks perfect.
I am reading voltage @ pass. door window control. Not sure what it means.
Connection blocks in drivers door tight & clean & show voltage.
Think I need a drivers door master control?
Thanks,
Tom
I am reading voltage @ pass. door window control. Not sure what it means.
Connection blocks in drivers door tight & clean & show voltage.
Think I need a drivers door master control?
Thanks,
Tom
#5
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Do the locks all work when you use the remote?
Make sure that the passenger window lockout option is selected as ON in the vehicle owner customization menu.(look in your maual for instructions).
If the window lockout selection is OFF, set it to ON and verify that the other controls work.
With a scan tool (tech 2) you can check for DTCs U1161, U1162, U1163 or U1170 which indicate one or more of the door modules is not communicating.
Make sure that the passenger window lockout option is selected as ON in the vehicle owner customization menu.(look in your maual for instructions).
If the window lockout selection is OFF, set it to ON and verify that the other controls work.
With a scan tool (tech 2) you can check for DTCs U1161, U1162, U1163 or U1170 which indicate one or more of the door modules is not communicating.
#8
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by glenecho
I am reading voltage @ pass. door window control. Not sure what it means.
Connection blocks in drivers door tight & clean & show voltage.
#9
Yes, 3 doors & R mirror do not work and, L rear door ajar, flashes @ dash.
This all happened after my dealer repaired my left front door leak.???????
Thanks for any help.
Tom
This all happened after my dealer repaired my left front door leak.???????
Thanks for any help.
Tom
Thread
Thread Starter
Forum
Replies
Last Post
Cali_Boneville
General GM Chat
3
08-02-2012 03:55 PM
andereck
2000-2005
3
08-10-2006 10:58 PM