Shift Solenoid A Performance/Stuck Off
#1
Shift Solenoid A Performance/Stuck Off
I have this code P0751 Shift Solenoid Perforamance/Stuck Off and my transmission is shifting hard, with a jerk from time to time. I would like to replace or repair this solenoid but I do not know where it is located or how to replace. Does anyone know what to do? Where do I find it and what does it look like?
Thanks,
Bob
Thanks,
Bob
Last edited by Mike; 04-19-2010 at 06:25 AM. Reason: Fixed title.
#2
Retired
This isn't an easy one to replace. Because of its location, the entire engine and transmission has to be tilted down in a particular direction to facilitate removal of the transmission sidepan. Which you will see in the first picture...
Once the cover is off, this is the solenoid that needs to be replaced...
Once the cover is off, this is the solenoid that needs to be replaced...
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Shift soleniod A is the one referenced by P0751.
In your year the easiest way will be to support the motor from above, unhook allthe items and remove the subframe, then use a jack to lower the driverside of the motor etc. This gives you room to pull the side cover and access all the soleniods.
In your year the easiest way will be to support the motor from above, unhook allthe items and remove the subframe, then use a jack to lower the driverside of the motor etc. This gives you room to pull the side cover and access all the soleniods.
Thread
Thread Starter
Forum
Replies
Last Post
CraZyDriVer868
Performance, Brainstorming & Tuning
16
10-18-2003 08:15 PM